ZOOMのデスクトップアプリ(携帯のアプリではない)が完全にグーグルカレンダーと同期しない。初期設定で「はじめに」と三つの行動を求められるが、プロフィール画像、バーチャル背景は出来たが、カレンダーを接続するができない。しかし、これを放置したままアプリでスケジュールを作成すると、それはグーグルカレンダーに反映されているし、招待もできており相手のグーグルカレンダーにも記載されている。しかし、グーグルカレンダーで作成したZOOM以外のスケジュールはZOOアプリのカレンダーには表示されない。WEBでアクセスし、プロフィール→その他のカレンダーは目的のカレンダーが登録されており、これを削除してZOOMアプリから連携しても、同じ連携状態で相変わらずZOOMアプリはカレンダー連携を要求してくる。尚、ZOOMのIDとグーグルカレンダーのIDは同じメールアドレスである。

Since updating to 6.2, the meetings tab no longer shows meetings. The calendar tab has been renamed as meetings and the meetings tab has been removed. There used to be an option to have both tabs as separate but Zoom decided to remove that functionality for its users.

Recurring meetings at "no fixed time" do not appear in the agenda. There is a small popup for recurring meetings which is far less functional or you can show the calendar sidebar and dropdown a list of recurring meetings all of which requires several more clicks and is far less visually clear.

I don't know why Zoom seem committed to making the software less functional or usable for paying customers but this foolishness is a major step back.

Please fix this fault ASAP as I will be choosing an alternative platform before the next billing cycle. There are many free platforms to choose from.

掲題の件につきまして、公開情報をもとに考え方をご質問させてください。

【内容】
Zoomのウェビナー帯域領域について

【わかっていること】
以下資料のヘルプサポートの帯域幅の要件内にある「ウェビナーの出席者に推奨される帯域幅」を拝見し、それぞれ会議やウェビナーについての一般的な帯域は把握しております。
https://support.zoom.com/hc/ja/article?id=zm_kb&sysparm_article=KB0060761#h_d278c327-e03d-4896-b19a-96a8f3c0c69c

【確認したいこと】
上記のURLの中のウェビナーに関する帯域幅についての確認となります。
----------------------------------------------------------------
・ウェビナーの出席者に推奨される帯域幅:
　・パネリストのビデオがオンの場合:
　・高品質のビデオでは 〜600 kbps（上り / 下り）
　・720p HD ビデオでは 〜1.2-1.8 Mbps（上り / 下り）
　・1080p HD ビデオでは 〜2-3 Mbps（下り）
・画面共有のみ（ビデオ サムネイルなし）: 50～75 kbps（下り）
・ビデオ サムネイルによる画面共有の場合: 50～150 kbps （下り）
・オーディオ VoIP の場合: 60～80 kbps（下り）
----------------------------------------------------------------
この時、「ビデオをオンにしながら画面共有する」といったように、複数の利用というケースがあると考えております。
そのような場合にどれくらい帯域幅をとることが推奨されるのかをご教示いただけますでしょうか。
具体例)
「パネリストのビデオがオンの場合」の3つの内「高品質ビデオを利用しているとき」の環境下でそれぞれ「画面共有のみ（ビデオ サムネイルなし）」 の環境を同時に使用した場合の帯域幅は以下のうちどのようになりますでしょうか。
ご教示いただけますと幸いです。
①２つの環境の領域幅を合計する
例）高品質のビデオと画面共有のみ（ビデオ サムネイルなし）を同時に使用した場合
（600 kbps）＋（50～75 kbps）＝650kbps~675kbps
②同時に使用することで合計するより帯域幅は減る
③同時に使用することで合計するより帯域幅は増える

ご確認のほどよろしくお願いいたします。

ーーー

I would like to ask you a question based on the publicly available information regarding the subject matter.

[Content]
About Zoom's webinar bandwidth range

[What I know]
I have read the "Recommended bandwidth for webinar attendees" in the bandwidth requirements section of the Help Support document below, and I understand the general bandwidth for meetings and webinars.
https://support.zoom.com/hc/ja/article?id=zm_kb&sysparm_article=KB0060761#h_d278c327-e03d-4896-b19a-96a8f3c0c69c

[What I want to confirm]
I would like to confirm the bandwidth for webinars in the URL above.
----------------------------------------------------------------

- ​​Recommended bandwidth for webinar attendees:

- If panelist video is on:

- For high quality video, ~600 kbps (up/down)

- For 720p HD video, ~1.2-1.8 Mbps (up/down)

- For 1080p HD video, ~2-3 Mbps (down)

- Screen sharing only (no video thumbnail): 50-75 kbps (down)

- For screen sharing with video thumbnail: 50-150 kbps (down)

- For audio VoIP: 60-80 kbps (down)

----------------------------------------------------------------

At this time, we think there will be cases where multiple uses are involved, such as "screen sharing while video is on."

Could you please tell us how much bandwidth is recommended in such cases?
Specific example)
When using "screen sharing only (no video thumbnail)" in each of the three environments "when using high quality video" under "when panelist video is on", what will be the bandwidth?

I would appreciate your advice.

① Add up the area widths of the two environments

Example) When using high quality video and screen sharing only (no video thumbnail) at the same time

(600 kbps) + (50-75 kbps) = 650kbps~675kbps

② Using them at the same time reduces the bandwidth more than adding them up

③ Using them at the same time increases the bandwidth more than adding them up

Thank you for your confirmation.

Hi everyone, I'm Darshan Hiranandani, I’ve encountered an issue where the screen sharing option is no longer available in the Zoom web client when using Brave. I’ve checked and confirmed that it works fine on other browsers, and I’ve disabled Brave Shields for Zoom, so I don’t believe it’s a Brave-related issue.

I'm using Arch Linux with the Hyprland compositor and PipeWire for screen sharing, and my Brave version is 1.73.91. Has anyone else faced this issue or found a solution?

Would appreciate any suggestions or troubleshooting tips to get screen sharing working again in Brave. Thanks!

Regards

Darshan Hiranandani 

Hi, 

Does anyone know how to fix so that the webinar doesn't start before I click "Start webinar"?

Held a webinar yesterday. Joined early together with the panelists, but apparently regular attendees/registrants who also joined early could see us prep, before I clicked "Start webinar". How's that possible? 

Would appreciate any insight. Thanks!

Hi! I need the transcript for a recorded session. I have a paid business zoom account and I recorded it to the cloud. It says I have a video of the recording and the audio only. There is no mention of the transcript. And I really need it. So you know how I can find it or make a transcript of it? 

Thank you so much!!

We have been holding 5 90-minute meetings M-F on Zoom since we created this account nearly 3 years ago. Up until recently anyone who logs in as host or is "made" a co-host by the host during the meeting has been able to send private DMs directly to other hosts/co-hosts or to any individual participant in the meeting. That ability has recently stopped. For example - if I - as a co-host - send a DM to another co-host during the meeting - it will appear to all the co-hosts and the host. It will look as though I sent it to myself. Or if another co-host sends a DM to someone who is neither a host nor co-host it will show to all the co-hosts and hosts as "You" in the DM - as though each one of us sent that DM. We have never had any problems like this before with Zoom and have never asked for any type of support but this is absolutely bonkers and is driving everyone in our group crazy. We cannot disseminate information correctly or we sometimes wind up disseminating it five times because no one knows what is going on. We have tried everything we can think of to correct this problem but have had no success. Any assistance that is offered will be greatly appreciated.