Starting July 10, 2024, customers must add their phone numbers to an approved 10 DLC campaign in order to keep using SMS/MMS capabilities on their numbers.
Register now for an upcoming 10DLC Enforcement Webinar.
Empowering you to increase productivity, improve team effectiveness, and enhance skills.
Learn moreKeep your Zoom app up to date to access the latest features.
Download Center Download the Zoom appDownload hi-res images and animations to elevate your next Zoom meeting.
Browse Backgrounds Zoom Virtual BackgroundsEmpowering you to increase productivity, improve team effectiveness, and enhance skills.
Zoom AI Companion2023-07-03 06:08 AM
Hi all.
I have a batch of Poly Edge B30 phones I purchased.
These are going in a store/shop environment.
I need to be able to hit a page button and have the message go over the phones and also the paging system in the shop.
With Yealink, I was able to do this very easily using Multicast and a provision template.
In my template, I use:
#KLB - Yealink T42S
#Paging Setting
multicast.paging_address.1.channel=0
multicast.paging_address.1.label=PAGE
multicast.paging_address.1.ip_address=224.0.1.116:8000
multicast.receive_priority.enable=1
##multicast.receive_priority.priority=
multicast.receive.use_speaker=1
##multicast.receive.enhance_volume=
##multicast.receive.ignore_dnd.priority=
multicast.listen_address.1.channel=0
multicast.listen_address.1.label=Store PAGING
multicast.listen_address.1.ip_address=224.0.1.116:8000
##volume = 1-15
multicast.listen_address.1.volume=15
linekey.5.label = PAGE
linekey.5.value = 224.0.1.116:8000
linekey.5.extension = 0
linekey.5.type = 24
I can't seem to figure out how to do something similar on a Poly B30.
Can anyone make a suggestion?
2023-07-04 01:36 PM
Hi kbudurka,
This poly document for poly edge b series may be of assistance.
Paging and Broadcasting Messages (poly.com)
Here is the zoom support article on templates.
Creating templates for phone settings – Zoom Support
Thanks, eliot