Provisioning Template Parameters for Yealink MP-series - Zoom Phone Appliances

[SilentDogood]

As the topic describes;   Does anyone have a parameter guide document for Yealink MP series phones?

Looking to build device provisioning templates for these phones.  However, there doesn't seem to be any documentation out there.   The Yealink T-series has a guide,  but the parameters given in that doc are not working.

For example,  looking to enable the Web Admin GUI, by default,   for MP-series devices.

Thanks in advance.

[haydn]

These parameters are defined and implemented by the Yealink team. You can contact them to get the most accurate parameters. But if the device web interface has settings you want to change, you can find them on the page. For example, if you want to change mp56 to IPv6, you can access the device web interface. Go to Basic -> Internet Port -> Mode (IPv4/IPv6) -> Click the ? after seeing to see the parameters and allowed values:

Description:
1.It configures the IP address mode.
CFG Configuration:
network.ip_address_mode
Valid Value:
(0-IPv4;1-IPv6;2-IPv4&IPv6)
Configuration Source Values:
Static: Not Applicable
Default: 0

---