cancel
Showing results for 
Search instead for 
Did you mean: 

Any possible way to use Yealink T41S desk phones with Zoom phone?

Yilmazer
Explorer
Explorer

We are in the process of switching over to Zoom phone and i would like to keep using our desk phones (Yealink T41S) if possible.

I however found out they are not in the list of compatible desk phones.

 

Is there maybe some way to get them to work? 

1 ACCEPTED SOLUTION

Manny5429
Community Champion | Employee
Community Champion | Employee

@Yilmazer You are correct, the Yealink t41s is not a Zoom Phone Certified Hardware  so this will not work. I suggest that you invest in any of the Certified ones. 

https://support.zoom.us/hc/en-us/articles/360001299063-Zoom-Phone-Certified-Hardware#h_8b9397f0-47ba...

In addition, please note that some devices are already end-of-life (EOL): (but still works with Zoom Phone) 

  • After the June 14, 2020 firmware upgrade, the following end-of-life (EOL) models are only allowed to use ZTP once: T29G, T41P, T42G, T46G, T48G, W56P.
If this answer helped solve your question/issue, please hit the -Accept as Solution- button below.

View solution in original post

3 REPLIES 3

Manny5429
Community Champion | Employee
Community Champion | Employee

@Yilmazer You are correct, the Yealink t41s is not a Zoom Phone Certified Hardware  so this will not work. I suggest that you invest in any of the Certified ones. 

https://support.zoom.us/hc/en-us/articles/360001299063-Zoom-Phone-Certified-Hardware#h_8b9397f0-47ba...

In addition, please note that some devices are already end-of-life (EOL): (but still works with Zoom Phone) 

  • After the June 14, 2020 firmware upgrade, the following end-of-life (EOL) models are only allowed to use ZTP once: T29G, T41P, T42G, T46G, T48G, W56P.
If this answer helped solve your question/issue, please hit the -Accept as Solution- button below.

Yilmazer
Explorer
Explorer

@Manny5429 

Thank you for your reply! 

 

gammo7
Newcomer
Newcomer

I have T41P and am in the same boat

Could I please have instructions on how to set up manually 🙂