Saving video position
![Malek12 Malek12](https://community-staging.gss.corp.zoom.com/html/assets/Avatar-Default2.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2021-09-02 01:54 AM
Hello, I use a zoomable and movable camera for my zoom meetings. Before starting a meeting I always adjust the camera to the perfect fit for my room and everything works fine. My problem begins when I stop the camera/video during the meeting (lunchbreak or attaching children 😄!). After starting the camera/video again the position/zoom of the camera is lost and must be set completely new. Is there any chance to save position/zoom? Remember, it is just after stopping video not stopping the meeting. Thank you....
![ToastmasterJohn ToastmasterJohn](https://community-staging.gss.corp.zoom.com/html/assets/Avatar-Default2.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2021-09-02 02:01 AM
This is not a zoom issue, it is the way your camera works. When zoom starts using the camera, it is resetting back to its default. Unless you can change the defualt setting at the camera end you will be stuck with this.
Webinar Manager for Toastmasters in UK
Independent Teacher and Trainer for Zoom Meetings and Webinars
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2021-09-02 07:56 AM
I believe @ToastmasterJohn is correct. The desktop client isn't typically connected to such a nice camera and isn't designed to handle PTZ and presets. The camera is resetting itself to its default position. If you were to use that camera with a Zoom Room, you can set presets on the controller, so that you can quickly bring the camera back to the specific focus and position you want.
![](/skins/images/D93763A9F3C55DDBB87E6BD01E11D3E8/responsive_peak/images/icon_anonymous_message.png)