cancel
Showing results for 
Search instead for 
Did you mean: 

Content sharing from Cisco webex room.

DanBav
Newcomer
Newcomer

Hi All,

 

We have an issue with screen sharing from our cisco webex room kits. If the call is outbound to zoom (ie <meetingID>@zoomcrc.com the share content causes spinning wheel and fails. Preview works as expected. 

 

If i dial the system from zoom meeting and answer on the touch 10 to join the meeting the content sharing works perfectly.

 

Anyone have any ideas on how to resolve/troubleshoot?

 

Cisco devices are registered to internal cisco call manager.

 

Appreciate and tips.

3 REPLIES 3

Dan_ZoomSE
Community Champion | Employee
Community Champion | Employee

Hello @DanBav :

 

You symptoms point towards firewall potentially blocking traffic....  Please review ALL of the ports and IP Blocks specified in our support document below:

https://support.zoom.us/hc/en-us/articles/201458316-Network-Firewall-Settings-for-CRC

 

Also, take a look at the attached document as it covers some recommended settings for CUCM.  Specifically look at the settings for BFCP and "Early Offer Support".

 

Please feel free to 'Accept as Solution' if you're now seeing success or write us back if you need more help.

Hi and thanks for the reply. In my case this was not the issue, these settings were already enabled and firewall ports correct. Issue is now resolved. Fixed by adjusting the ICE Support setting on the Expressway C zone to on.

 

Expressway version 12.5. This is a new setting introduce in an upgrade to 12.5.

 

Dan_ZoomSE
Community Champion | Employee
Community Champion | Employee

Glad to hear you got your issue resolved and thank you for sharing back with the community for other users!