Products

Hello, I have recently deleted all my videos from my trash folder. It was a mistake, deleted permanently but I do really need those videos since they belong to an important interview done to an important person. Is there any chance I can get it again?

We picked up a Brother 820NWB and a small form form factor Windows 11 machine.  Got everything installed and set it up and as Visitor Check in Kiosk.  Set it up to share the printer using the printer agent and I can now print badges from the Kiosk and from a remote Neat Frame.  I am curious now that I have it setup and printing, there seems to be a lot of wasted space on the badges.  I am curious if there is a way to modify the borders that this thing is printing on to use up more of the sticker (we are running the DK-1234).  There seems to be 3/4 to 1/2 an inch on the sides and a little over 1/2 an inch on top and bottom that is just white space.  Figured if I can make the printing area larger then the text could be bigger or scaled better to make it more legible or possibly make the pictures look better (from what I read that is doubtful though).

  Hi there,my company uses Zoom as a chat for internal communications. Sometimes it happens that the zoom on my Windows 11 PC is apparently operational but in reality I am offline for other colleagues. Colleagues write to me but for them I am offline even if for my zoom I am online. The only way to solve the problem is to become reachable again with the chats and restart zoom. This happens about every 2 or 3 hours even with the PC in use. Zoom is updated and connected with a Lan cable. Thank you so much.

カメラが起動せず、ミーティング時に自分の顔が表示されません。今までは使えていたのですが、先日いきなり真っ暗になってしまいました。バーチャル背景等も映らず真っ暗な画面のままです。再起動、デバイス側の設定の確認、再インストール等も試しましたが、解決しません。他のアプリ（GooglemeetやMicrosoft teams、Windowsのカメラアプリ）ではカメラが正常に使用できたため、カメラの故障ではありません。マイクは問題なく使用できます。カメラだけがどうやっても真っ暗なままです。対処法をご存知の方いらっしゃいますでしょうか。

Upcoming date range not allowing to see all meetings schedule and will not allow to adjust dates.  This allows for double booking.  Also will not allow me to view date that I am trying to schedule for to see if there is already a meeting scheduled.  i.e, I know there is a meeting scheduled but when I schedule a test meeting at the same time it allows me to schedule on top of the meeting already scheduled.  Previously i could see all meetings scheduled, now i can only view the next 2 months.  We schedule our board and board committee meetings a year out.  Something changed about a month ago and now cannot see ALL upcoming meetings.

Hi! My zoom has been perfectly fine until a few days ago. I was in a lecture when i decided to play some music from spotify while the prof was screen sharing a video. But then the spotify sound was so muffled, which has never happened before. Then suddenly the spotify sound went perfectly normal but then till this day i can't hear anything when someone's screen sharing. I can hear perfectly fine if they're talking through their mics but i can't hear anything from the screen shared. I've been looking everywhere for help so please help me with this.. and no, there's no problem with my laptop speaker as it still does the same thing even when i connect to bluetooth speaker or headphones. i tried reinstalling and restarting but still no use..

This program violates standard windows UI protocols:  it refuses to close when the "X" in the upper right is clicked.This is the same scammy behavior we have seen from malware,  viruses and other apps that try to take control of the system, disregarding the user's desires.  There is another thread on this topic, but it was closed with the resolution "by design", which is a terrible answer and shows this company does not care two wits about it's users.Until such time as this company decides to follow standard UI protocols, we must take matters into our own hands...Create a batch file on the windows desktop that contains this line:taskkill /F /IM zoom.exe /TExecute this bat file when you are done with your session and it will force Zoom and all child processes to close immediately.It is quick and it works well.

I'm new to Zoom so apologies in advance for asking what may be an egregiously dumb question. I've been trying -- without success -- to disable the camera on Zoom. I've searched for the answer both on Zoom's website and the Internet. One solution, for example, was to go first to the Settings menu, then to the Video tab. There is supposed to be an "always turn off my video" option -- only there isn't. I've come across other solutions to either disable the camera or at least enable me to hide myself while on Zoom  -- none of which work.  Any advice would be most appreciated. Thank you for taking the time to read this. 

THIS IS RELATED TO TRYING TO LOG IN.Under zoom.com and zoom.us I do not see LOG IN anywhere and it's been frustrating to have to keep clicking on anything and everything to finally get to my dashboard! Sheesh. Has (1) anyone else had this issue and (2) why is it so hard to reach someone in customer service to get them to fix it? Anyone know if there's a live chat somewhere to be able to connect with them? Weird thing is a few months ago "Log In" was always there when I went to either of the two main websites that I noted above. Now it's gone.

if you create a Shared Space and choose one of the default channels you have created (where every member of the organization is in the default channel) to add the members, does the Shared Space get updated each time a new employee is added to the default channel?

In my Zoom Pro app, under "Recordings and Transcripts", the link is no longer displayed next to each of my past Audio/Video recordings.  This was the best & easiest way to click on Share WHENEVER I needed to send a recording to my own email address or to 1 or more of my Contacts, even several months after the recording was made.  Note that I do not wish a third-party application to solve this issue.  Thank you for your help.

Hello,How can I disable the notification "Not hearing anything? Turn up volume"?This notification started appearing after I updated Zoom for Windows to version 5.16.10 and appears when the computer's volume is equal to or less than 10%.I couldn't find the option to disable this alert in the Accessibility menu.

How can I change the name of the sender that appears when participants receive their registration confirmation? Last year it was possible to change both the sender and the email address, now only the email address can be changed, but not the sender. Is there a solution for this without changing the account name?

Hi I am mod for an investor event for my company in 2 days and have discovered that the settings are different to the ones I usually have when I have just done a zoom webinar. I chose to upgrade my subscription to the new 'event' option as the branding is nicer, but in my trial run I couldn't work out how to get 2 speakers plus the presentation slides on the screen. It lets me select side by side presenter mode (shows the slides plus 1 person) but I want to have 2 people visible while the slides are up. I tried spotlighting two people but it isn't changing what attendees will see. Please help me!

Hola! Quisiera que los participantes en una reunión vean la versión espejo que veo yo de mi propio vídeo, y no cómo si me vieran en la vida real. No es posible hacer esto en Zoom? Ayuda por favor! No encuentro soluciones por ningún lado

Why am I getting that  SMS to Puerto Rico does not work. Puerto Rico is domestic. 

Dear Zoom Support Team,I hope you are doing well.We are currently implementing a group video experience using the Zoom Video SDK (version @zoom/videosdk 2.3.0) in a React.js (TypeScript) application. As part of our requirement, we aim to render up to 12 participant video streams simultaneously on the screen.However, we are encountering a critical issue once the number of participants increases during the session. Specifically, when the 5th or 6th participant joins, the previously rendered participant videos begin to flicker intermittently. At the same time, the browser console repeatedly logs the following warning:“WARNING: Too many active WebGL contexts. Oldest context will be lost.”After this warning begins appearing, some of the video streams flicker, freeze, or turn blank. Based on our a

Hello,I have a small issue with the Zoom API. When retrieving the participants of a webinar, one of them does not have a “last_name” field. However, this field is required to join our meetings/webinars.What’s even more confusing is that, when retrieving the participant list through your interfaces, the person does have a last name.How is this possible?

I am the only one able to start sessions on my Zoom Pro account.  And I would like to temporarly transfer this responsibility to another people of my organization ?  Nothing is done today for that (no e-mail déclared in Zoom paramters).  What I have to do ?  Thanks a lot ! 

I recorded a meeting this evening that has not shown up in my account. This has never happened to me before. I am the host and the owner. How can I retrieve the recording? Thank you. 

Is there a way to set up a webinar in which the webinar participant will have their camera on, but mic will be off until unmuted by host?

So, Zoom has now added Autoframe for your video source, but we still don't seem to have ordinary Zoom software/settings for manual Resize/Pan/ReFrame  of  the video image. This facility, which users have been asking for since Zoom started, is still missing. Yes, on a PC/Mac, yes you can use OBS to pre-process the camera/video image, then use your virtual camera in Zoom. Yes, on a Mac, you can use iGlasses from ECAMM to pre-process the camera/video image, then use your virtual camera in Zoom. On the iPad and other tablets/phones there's nothing to do this 'live camera/video Resize/Pan/ReFrame postprocessing'. If you can do some fancy image shifting with 'Autoframe', then come on Zoom, give us a simple camer/video feed Resize/Pan/ReFrame control for ourselves! 

We make extensive use of Auto-Framing with our older Poly X50. Recently we purchased some new Poly X72 units and were extremely disappointed to find that they do not appear to support this feature. Does anyone know if there is a way to get Zoom Room participant framing working with the Poly X72? Thank you.

Seeing this happen more and more in one of our rooms that utilizes a Poly Studio G62. Anyone else running into this issue/know how to permanently resolve?  

I have been using Zoom for 1 on 1 meetings with my students for the last 2 years on my all in 1 PC desktop. I do not have external speakers nor an external mic. There is no one else in my office so no other computers or speakers near me. I use the original sound for musicians and no noise cancelations since I need to make sure we both can hear softer sounds such as /k/ and /th/. Everything has been smooth up until a few weeks ago when my voice started echoing like crazy. My students can't hear it on their end, and they don't echo, only I do ( on my computer only). I have updated drivers, used head phones, played around with mic and speaker volume , as well as played around with some of the zoom sound options... nothing has helped....... any suggestions?