cancel
Showing results for 
Search instead for 
Did you mean: 

Zoom and Polycom group 700 series codec

CN3
Newcomer
Newcomer

We have a couple of Polycom Group 700 series codecs. We are wanting to use them to dial zoom IPs and then join a Zoom call - by entering meeting ID and password through the polycom touch screen. We have a couple of Zoom IPs saved from previous session. We go in through the touch screen, select call and then search the favourites and select the appropriate IP. When we press call, the call is tried briefly but then "tjhe call has ended"  appears or it goes right back to the same screen. Nothing happens. In the past it would call and then Zoom meeting comes up asking to put in meeting ID and password - this is no longer happening. We are not doing anything through SIP, but have H.323 selected, We are also not using any of the backend polycom server technology as we had in the past such as RPM, RPAD, etc, I am not sure why this is no longer working. Is there something else I should be doing?

1 REPLY 1

Rzapatero
Newcomer
Newcomer

we are experiencing the same issue. Initiate a call to Zoom and we connect but shorty after the calls disconnects. While the call is connected the far end doesn’t get  video or audio. We are not using SIP but h.323. Hopefully Zoom support can chime in and assist. Ty.