Products

I just set up a scheduled meeting on YouTube and i want to use custom live streaming, there is no problem at the very first time, but when i want to stream a new scheduled meeting, in the zoom app, i cannot set up new custom live streaming datas, because it wants to stream automatically with the settings before. How can i reset it?

System : Dynabook Portege X40-KOS : Windows 11Zoom version : 6.3.6 (56144) Zoom audio output is very, very low. I can hardly hear anything. Volume is maximized (100%) in Zoom as well as in the system. No problem with YouTube videos. Tried https://zoom.us/test also. Same results. However, in this I noticed that the output sound starts loud and clear but goes down within a second. Googled a bit and based on what I read, I tried the following in the zoom Audio settings    - Set signal processing by Windows audio device drivers too "off(Windows - raw)"   - Windows system audio enhancements to "off". Problem persists. How to fix this? Thanks

 I've been producing webinars on zoom for several years now, and in the earlier versions of Zoom, there used to be an option to automatically engage "Original Sound for Musicians" when a certain sound source was selected. Right now if you change audio sources, it toggles off as well and stays off when you come back to the sound source which previously **was** in "Musician" mode. Would it not make more sense for it to have to be turned off if you DON'T want it, (after all you've already selected to engage it the settings). It worked fine before, could we have that again?

I'm not sure if there's been a change in the way zoom does it, but it used to be that I was able to set up "Speaker View" as the default view for attendees in a webinar.Does anyone know how to set this up now? I've tried looking up and down the settings, and I can't seem to find a way to do it. In case this feature is not built-in, I hope the folks from zoom are looking at this. it's especially helpful when there are many moving parts in the Webinar and sometimes changing the view is overlooked - which leads to the audience seeing what it's not supposed to...

ビデオ通話を１時間するとしたら、必ず一回以上は落ちてしまいます。何が原因なのかわかりません。他のアプリやブラウザのツールなどは落ちることは、ほとんど無い、90%以上は落ちることはないです。ZOOMだけ調子が悪いです。どうしたら改善するでしょうか？

Hi,With the new feature added with v6.0.10, I can now configure the default settings of breakout rooms beforehand— thanks for that.Unfortunately, they still have to be "opened" by a Host or Co-Host every single time.Could you please add the option to have the rooms opened at the start of the meeting?Alternatively, adding the option to allow non-hosts to start them would also work 🙂Thank you

I have a Pro subscription. I host a meeting three times per week. Occasionally, it's as if I'm not the meeting owner of my meeting. The main way to tell when this is happening, is that I am unable to start the timer. When I click Apps, I am asked to purchase a package of apps. Then I check to see if I'm the host by checking to see if I can assign someone else as the host and that isn't an option.I try going into my account and at login, I'm asked to "Please check your other device." What device is this? I've tried checking my phone, my email but there's nothing there. Has my account been hacked?I've had non-host attendees that have been able to access Zoom features that I appear to be locked out of... AGAIN, this is an intermittent problem. What is going on?

Is there a way to turn the auto-recording off for only one or two members of the team? Or is it an on for one, on for all situation? Thank you 

When on a conference call the other parties are able to hear me from the first word to the last, but once it shifts to them to talk, there is a significant delay before I can hear what they are saying... so much so that I have to ask them to repeat themselves, which if we are talking and they aren't quit for too long, we are fine.  But once I have talked for a bit, I hear a beep, then when I ask them to respond, it takes a bit of time for Zoom to recognize that they are speaking.  They get the green boarder and the mouth is moving, but the audio is delayed, and I pick them up halfway thru a sentence.  How do I fix?  Also, when there have been three parties, the other two don't have the delay on their side, it's only on my side. 

Hi everyoneAny idea why Iran is not included in the registration lists of Zoom? every islands of the middle of nowhere is included, but Iran, is not!:)

Is it possible to permanently turn off someone else's status message? This never used to be there, is this part of an update? I keep clicking the X to the right but the Status message keeps coming back. I don't want to see the status message as it is irrelevant as some people do not use it as status message. I have removed the status message in the screenshot below but it pops up in a grey banner at the bottom of the screen where the text I have put "some text here...." 

I'm not really sure if it's a bug. However, I haven't encountered this issue before updating to version 6.3.6. So, I assume it might be a bug that showing double vision when writing on screen. Could you please check? Thanks

It has always worked for me, but now, when I click on the bar to be sent a code, it does not, so I cannot log in as I always have. I need this for work so I really need a solution soon. I work from home and holding my phone during sessions is not an option.

I teach an exercise class via music Sharing Music. Recently, we tried to hold the class in a gym with additional live folks. We needed an external speaker for the folks in the gym to hear. But, whether we plugged it in or used Bluetooth, the Zoomers could no  hear well. I think the music may not have been Shared when we plugged in the speaker. How can I use the music over Zoom and with a Mic? 

I pay for Zoom.  I host Zoom meetings.  I use the AI Companion on all my Zoom meetings.I also am a guest on other people's Zoom meetings.  I have the option to ask them to enable AI Companion but I have no access to the summary if they accept.  Why would Zoom leave out such a powerful and useful option?  I can understand not making it available to non paying Zoom participants but come on!

Is this possible to get a transcript from MP4 recording after the meeting has ended?

I have used a paid version, a different free version as well as being a participant on someone else’s Zoom call when the meeting ends at precisely 17 minutes. I wrote to Zoom support with no response from them. It possibly is a setting I need to change but don’t know where to look or begin. FYI, I am in Spain and using a VPN blocker so the IP address shouldn’t be an issue. Any direction would be appreciated.  

Can I use Ai to view a Utube video and summarize it's content?

Hello everyone,I'm having trouble setting up my phone number in the Zoom Phone system. When someone calls the number, they hear the message: "Please press 0 to speak to the operator." However, when "0" is pressed, the caller hears: "There’s nobody at that extension."I’ve tried configuring this in my Zoom account settings but haven’t been able to figure out where or how to fix this. I’m looking for help with the following:How to correctly set up the "Press 0 for operator" functionality so it routes to the correct person or extension.Where in the Zoom admin settings I can configure this behavior.Any specific settings I need to review or adjust to make this work as intended.I would appreciate detailed guidance or any steps I can follow to troubleshoot and resolve this issue.Thank you in advance for your help!

On one of the users iPhone , zoom for intune app doesn't have the PIP setting toggle option. He has the latest zoom version and in the phone general setting PIP is enable, also background refresh setting is enabled for the app. Tried uninstall and install the app, but nothing works. The PIP setting on zoom app meeting setting doesn't show up. Has anyone encountered the same scenario before and if so found any solution ?  Please help.  Thanks

I'm currently in the job search process and have encountered this problem three separate times now.1) The recruiter/hiring manager sends me a regular email saying they scheduled our meeting via Zoom.2) I do not receive an invitation via email from Zoom, nor does the meeting appear on my Zoom schedule on the desktop app/web app or Google Calendar. An invite email is not in my Spam/Junk folder.3) I email the recruiter/hiring manager asking them to resend the invitation or meeting link, but they assure me I was sent the invitation and they can see me as "accepted" on their end.4) I have to ask them to send the meeting details via email anyway, which makes me look entirely unprofessional. Is this a known issue? How can I ensure my email is whitelisted by Zoom? I did the "test email" function with the chat bot, which are delivered, but I don't get any other Zoom emails.

I am working on configuring the Salesforce and Zoom For Lightning App(App exchange package) and cant seem to get it to work. Dialing in works fine when i call the zoom number. However, when a user logs into Zoom and tries dialing out theyll get stuck at the "dialing screen" where the number pops up and it says "calling" but doesnt ring. Does anybody have any help/tips to reccomend trying? 

Have Zoom Phone for about 162 users.  Our users use a combination of Zoom app and Polycom VVX310 desk phones.  Most use both (have a desk phone and use the app when remote). Our front desk uses a Polycom desk phone but mostly uses the Zoom app with the PowerPak add on.   I am getting more and more reports of when a call is transferred one person cannot hear the other.  It can vary on if its one of my users who cannot hear, or the remote side, but once that party calls back, the second call - audio is fine. This is happening on WARM transfers. Microphone and audio settings are not in play here as its random and occurs with the app and desk phones both, but again completely random. I am not sure even where to start with this troubleshooting.  Logs show everything is good.   Call logs do not show any errors of course as the calls are completed

I cannot deactivate the remote control in Linux with the shortcut key. It is not working. I need the shortcut key to work on Linux.

I started recording but forgot to end before I ended the meeting.  Will the recording save?