Solved

Version: 6.4.6 (53970) I host a meeting weekly. The meeting is established as a recurring meeting.  Each week, I send an e mail to potential participants to invite them to the meeting. I copy the meeting link from the zoom software and paste this into the e mail.  For the past two weeks, I have started the meeting from the zoom software.  The participants click the e mail link and get a message that the host is currently in another meeting. I do not get anyone join me in the meeting. The workaround is that I close the meeting I have started from the zoom software and click the link from the sent e mail. The meeting starts and everyone joins.  The meeting ID in the zoom software is the same as the meeting ID in the email. The e mail meeting invite is copied and pasted from the zoom software. What am I doing wrong and what to I need to do to put it right?

Does zoom work on safari (when launching zoom on browser)? What version of safari is needed to launch zoom on the Safari browser on iphone? 

I've got Zoom rooms deployed on a Rallybar and Sight setup. We had picture in picture mode enabled where it would should the whole room from the rallybars point of view below the Sights Speaker point of view. It stopped working about a month ago and I'm at a loss on how to get this working again.

Hi,I think that everything is in the title (-:Thank's in advance for your help(and fyi: the help chat is really really dumb !)Herve

I just purchased a zoom phone number then I can't make any phone call. 

Hello! I have a recurring Zoom meeting set and have designated some people on my team to be alternate hosts since we rotate responsibility over the meeting. In the meeting settings, I have designated all of them to be alternate hosts. However, today, two people from my team joined and were not given hosting abilities, even though they are designated alternate hosts in the meeting settings.  Why aren't they assigned as hosts? Is there something I am doing wrong? 

I am using Zoom to contact a client. I am polish speaking person, so my primary keyboard settings on my OS is set to polish. But i am using english to communicate with client. Zoom is autocorrecting some of my words when i am using english into polish similar one, eg. them -> tchem (which is correct polish word), finish -> finisz (same as before) and some other. Its annoying, and it happens all the time. I was looking for some setting for it, but there is none or i am literally blind. And it happens only in Zoom, no other app and i tend to use mixed languages everywhere, not only Zoom. Is there a way to force Zoom to use english or disable this autocorrect completely?

Been having this problem for two months with no resolution. Computer is hooked up to Dual Monitors and works fine for the day until I join a Zoom Meeting at which point ALL of the computers apps, moving my mouse around the screen, etc. all lags.  AGAIN, computer only lags once I join the Zoom Meeting, even if my mic and camera are off and I'm not screensharing. All apps lag. Mouse movement lags bad which has nothing to do with internet.  About half of the time, I can unplug from the dual monitors and it'll speed up. Sometimes it requires restarting my computer for the computer to stop lagging even after the call.  Hardware & Software: - Dell Latitude 7430 (new in March 2023) / 12th Gen Intel Core i7-1265U 1.80GHz / 32GB Ram / 64-bit, x64-based processor /Windows 11 Enterprise version 22H2- TWO Dell 2422HE monitors with built-in docking station, daisy-chained and plugged into laptop via USB-C. Modem hardwired to Monitors. - Zoom v 5.

I want to log into my zoom account and schedule a meeting on my home laptap and invite participants. On the day of the meeting this laptop will not be available, zoom will be logged out and the laptop will be switched off. I will be at another location when the meeting is scheduled to start - can I log into my zoom account from a different laptop at this second location and start and run the scheduled meeting?  

My team uses Zoom for as many meetings as possible, but as a consulting company we cannot always choose the meeting platform. We need the ability to add our AI Companion to meetings that we do not and cannot manage. A bot that we can add to MS Teams, GoTo and Google meetings, similar to the dedicated note taking AI apps like Fireflies, Read, and Otter, would save our team from turning to a competing solution for meeting summaries and action items.  If this is available, please let me know how I can enable the feature.Thank you.

We've had a webinar set up for months now with a particular title and just recently the title of the Zoom webinar changed to 'Zoom Webinar'. Apparently, admin can change this but neither the owner nor admin can change this. Does anyone have any answers?

No text available

I have the basic account. I'm not getting the verification code in my email to terminate my account. I have checked my spam folder. 

My ZOOM account used to work properly. Now, and I don't know why, it is not working the way it did before. Whenever I set up a meeting ahead of time, then later join the meeting, then ZOOM thinks that I am a PARTICIPANT. It does not recognize me as the owner of the account, so I cannot make someone a co-host and I cannot allow someone to record the meeting. How can I fix this?

OS version: Ubuntu 24.04.2 LTSZoom version: 6.4.6 (1370)Hardware: Dell XPS 9320 Laptop, using integrated mic and speakers. Problem: During Zoom meetings, my sound and microphone will abruptly stop working. When this happens, if I go into audio settings and click "Test Speaker" no sound plays. My microphone still transmits sound, but it becomes very distorted and low quality. This state can usually be fixed by leaving and rejoining the Zoom meeting. It also seems to have a chance of being fixed every time I swap speaker devices in the Zoom settings. I can usually trigger this state by sharing screen or otherwise swapping focus away from Zoom. I don't have this issue with any software other than Zoom. I have a suspicion that this is a Pipewire/Wireplumber issue, but I don't understand enough about how Zoom interacts with those to troubleshoot. I haven't found any transparent documentation about that. Troubleshooting steps I have tried:1. Checking that I am not muted, and t

Starting two weeks ago, I can no longer change the audience when FB launches via zoom.  In the past the audience is set to (only me) and I could change to public. Don't know why the Zoom FB audience is set to "only me" when my FB profile audience is set to public.  I would like my audience set permanently to public and not "only me" when zoom launches FB. How can this be fixed. Once I end streaming to FB from zoom, it will allow me to change to public but not while it is live. Very frustrating. 

I was removed from an account but need to access my recordings so I can download them. The admin readded me but when I try to login, it keeps taking me to my downgraded account. How can I access the old account so I can get my recordings? 

Why does my phone keep ringing in my headphones after I've answered?  No, there's not another call coming in.It also continues to ring (in my headphones) if the caller drops the call before someone answers. Is there a setting to fix that?  If so, where?

Up until recently, Zoom would email alternate hosts when a cloud recording was ready. Now I get them (as I'm the meeting host) but none of the alt hosts do. This post references a setting that apparently no longer exists:https://community.zoom.com/t5/Zoom-Meetings/How-to-send-alert-via-email-of-ready-meeting-recording/m-p/132666 Was that functionality removed? If so, what are my alternatives? 

Hello, I’m using a Mac and recently I haven’t been able to log in to the Zoom desktop app. I get error code 1132 every time I try (I’ve tested with different accounts).I’ve already:– Uninstalled and reinstalled Zoom– Checked firewall and security settings– Tried both Apple Silicon and Intel versions– Used Safari to log in via web (it works)But the desktop app still won’t let me log in.Is there a solution for free users to fix this?Thank you!

I am getting this error Code 1132 everytime and i did nothing wrong I used Zoom 3 times only can smn help?

Hi there, I hope someone can help me with some advice. I have started a free monthly "Gathering Space" on zoom. During the first one, for which I registered participants via Eventbrite, someone sent an abusive message. I was not clear whether it was the person it seemed to be or note, as when I sent a DM reply, an automatic message popped up to say "your message cannot be delivered to XXXX as XXXX is not in the meeting", but I could very clearly see and hear XXXX in the meeting". I have dealt with this and won't dwell anymore but I share it because it means I wanted more security. I set up my next meeting on Zoom, and promoted registration it via linked in events . I activated as much security as I could on Zoom. When it came to people accessing the meeting, a number of people could not get in because I had set it to only allow "registered members" so I had to remove that. Then people could not get in (including my co-host, who was registered as a presenter) because

Hello, I can't join the zoom meeting from app or browser and it shows me just this error code as 1132.I tried different browsers and different em

Updated Zoom today and now the built in microphone will not work. If I mute, then unmute, the microphone will pick up my voice for a half of a second (microphone icon shows green) and then it cuts out. Muting and unmuting a second time has no effect. I have updated microphone driver (already had the most updated version), disabled, enabled, uninstalled & reinstalled. Microphone works on the test side of the laptop. Will not work on the test side of Zoom. I have uninstalled and reinstalled Zoom. Microphone is allowed for all programs. It was working normally before the Zoom update. Nothing else has changed on my laptop otherwise. I have all the auto enhancements turned off. I have toggled through the settings to test each one. Microsoft Windows 11 on HP Envy. What am I missing?

I have paid a monthly payment today on 22 June but on renewal there is 22 June written how to solve this error