Products

I would like to use 3rd party interpterion software link in zoom webinar meeting as translation for the meeting session. currently we are using livevoice 3rd party online partners where we have 2 separate links for speakers and audiences. Those 2 links are opened in two different laptop and providing translation voice from speaker to reach audiences by network/link provide.  but as per the setting we have in zoom we can add only account of interspersion only. 

I want to share the AI meeting summary however the share button is disabled and says to enable email notifications. I've checked my email notifications and believe they are turned on.  Is there a specific notification setting that must be on? If so what is it? I can't find anything in the help information. 

Zoomphoneでの一般電話への通話がワンコールで，もしくは相手方が出てすぐに切れてしまうことが多くあります。前者の場合はかなりの音量で，女性の声で「この電話からはただいまお繋ぎできません。時間が経ってから再度お試しください」というようなアナウンスが流れます。 Zoomphoneで使っている端末はiPhone XRです。そのような症状が出て

Hi,I cannot connect to the audio when starting my own meeting, for both myself and my guests. The mic and speaker tested fine.   I am using my MacBook and the audio type under the setting is set to use computer audio. The usual mute/unmute button disappeared and was replaced with "Join Audio" on the bottom of my screen.  Upon click, it says "The meeting does not support dial in or Call Me to join. You cannot connect to the audio."    I have never had this issue before until I changed my passcode for the meeting.  Also in my setting I wasn't able to change the passcode anymore because it's "Locked by admin".  I thought I am the admin of my own account. I went through all my settings and read many articles from the SUPPORT resources and couldn't figure out how to resolve.  I submitted a ticket to the Zoom support but they closed my request without looking into my case.  Any help is greatly appreciated!

I've got three Zoom rooms, all with the same hardware configurations that have been running smoothly for several months.Recently, they will intermittently report they fail the audio echo test.Client reports echo happens on participants end, attendees do not hear any echo.I've restarted all hardware, and can get the echo test to pass by bringing the volume down to unreasonably low levels.I thought I had balanced the levels correctly, but came in today to see two rooms failing the echo test over the weekend.Are there further troubleshooting steps? Has there been a recent change in audio sensitivity?

I had a client ask me a question today and I wanted to give them a complete answer. She asked if you can Livestream from a Zoom-Room setup.We have recently installed a Zoom Room in a community space and have an instructor that asked me today if she can Livestream?You can Livestream on the desktop client, I know that,  but in a Zoom-Room setup?She has her meeting settings ON for the Livestream function, but I do not see an option for that in the Zoom Room.Is it possible?

Is there a way to get messages in Team Chat desktop app that are bookmarked to show up like they do in the phone app? In the phone app, if I'm looking at a chat message that has been bookmarked, the bookmark icon shows up next to the message. In the desktop app, that same message does not have that icon and I can't tell what has been bookmarked unless I look at my Bookmarks. Would love to have that icon.  

I am working on setting up an event and we have a number exhibitors/sponsors for it. The event is hybrid so they are with us in onsite but we want to recognize them online too. The page showing their name an logo looks great and would be enough to meet our needs, however because the logos click through to something I have just spent quite some time building out pages for each exhibitor so there isn't an almost blank page if shown if the logo is clicked on. We gave the exhibitors the capacity to add content themselves and sent an email encouraging them to do so but no one did, not high on their list of priorities. Can I suggest that there be an option to turn the page on and off, if it is off the logo can be shown and just not clickable, and maybe the ones that are clickable could have link for 'Learn more'. It is a great feature to have but if don't want to embarrass your exhibitors/sponsors with blank pages it does force you to add some content

How can we have the same multi-camera visual that we have during a Zoom meeting for when we utilize Teams in the Zoom Room?

zoom on the web works fine. can login with no problem cannot use the zoom desktop app. getting error 124. how can I resolve this? Everything I read seems to be something with the token. Can this be fixed with a powershell script? If so, please provide script. Please help. urgent. TIA

Have a Jabra Panacast 50 VBS that we want to change the "Tap Controller to Start Display" screen to our company logo. (Not a virtual Background) Has anyone been able to add file to change that screen? have seen some vague answers to this but still not seeing the correct menu options. Referencing this https://community.zoom.com/t5/Zoom-Rooms-and-Workspaces/Tap-Controller-to-Start-Display/m-p/157695/highlight/true I don't see a "Rooms Profile" in settings which seems to be the key.  Is it a limitation on the hardware we have? Do I need to have the admin account get to the "Rooms Profile" menu to add the file for the background?   

We have saved our recordings of client meetings for the last 4 years which equates to thousands of hours of advice given to clients.  I would like to learn how we can have AI listen/read all of the recordings and develop a 'playbook of scenarios', based on those recordings from a variety of different client relationship managers.

It seems that the only way for a recipient to acknowledge that they've picked up a package in Zoom’s Delivery Management system is through a designated kiosk. I don't want to spend money on a device just to perform this function. Is there no way for the user to indicate they picked up a package right in the app?

Hey there. I'm looking to enable the Zoom AI Companion for certain users of our company. I tried going into the Account Settings and turning on the toggle switch but it doesn't stay on, it just goes back to off. I then get a message the settings have been saved.  I need to figure out why I can't turn this on, and then explore how to control access to only certain users.  Thanks in advance!

Hello.  When an incoming call comes in, it takes the focus.  This is frustrating for our customer support reps as they are in the middle of typing notes and the focus is taken away as they type.  Is there a way to have the call still appearing, but not take the front focus?

Hello, I am looking for a way that Zoom would pick up the dialogue I am having with a client on the phone. Is there an easy way to set that up in the Zoom settings. Basically, I need the phone call to be the mic input on zoom so people on the zoom call can hear both sides of the call in high quality. Thanks!

I attended a bootcamp class via Zoom back in 2021, and the host shared Zoom cloud recordings that I’ve been using almost daily ever since. These 17 videos have been genuinely life-changing for me. They’ve become a core part of my routine, both mentally and physically.Unfortunately, the links now say “This video no longer exists.” I wasn’t the host, but I do still have all 17 links and passwords saved.Is there any way to recover or trace these recordings, or at least check if they were permanently deleted? I’d be incredibly grateful for any guidance you can offer.

Zoom Workplace, up to date version. If I open settings window, it stays atop of all other windows making use of other apps impossible.When I tap on View More Settings, a browser opens and... I can't use it, because the original Settings window blocks me from it.What is the sacred logic that I am unable to understand, is behind this?

India is not in the list of available countries in the Global Dial in or  Toll Call.  How do I add India as one of the Dial in countries?

In Zoom Pro, it would be super helpful to be able to select and send a chat message to more than one participant at a time, without messaging the entire group.

Hello, I wanted to know if there is a way I can create reports to show investors when using Zoom. I'm not sure if Zoom has that capability yet or where I can find it, but if it does, please let me know!

Hey, we would like to bulk update our phones to have the company number as the outgoing caller ID in line key one but have noticed the csv import/export does not have this feature for all users. This only seems to exist on a per user basis. Anyone managed to achieve this?

Sometimes, I use a VPN when I use Zoom. This VPN chooses a server in another country. However, I don't use the VPN at all times.This means that sometimes I use my login credentials while being in my country and other times in another country.  Could this make Zoom think I am breaking the license terms of point "1.2 Prohibition on Sharing"? Because I think it may feel like I have connected from different places, with two different IPs. I know people can travel, and you are in the same situation, but sometimes I forget to activate the VPN, and I connect to Zoom just 5 minutes after I realise I didn't activate the VPN. When I activate it, I am suddenly in another country in 5 minutes. I guess Zoom can differentiate one situation from another, but I want to avoid surprises.

Super frustrating problem: When I am scheduling a Zoom meeting, I am adding the email addresses of my attendees in the Attendees box. But then, when I create Zoom opens up Outlook, and requires me to invite the invitees again. It then sends the invite from my the calender tied to the Exchange 365 account I have.  But that is my work account. My Zoom account has nothing to do with my work email account. And I don't want invites coming from my work account. The calendar integration I have selected is a Google Account, not a Microsoft account. (see it here). Yet every time, no matter what I do, it sends invites by opening outlook and demanding I again enter the addresses.  I suspect this might be due to a recent update (see it

Hello! We are using Zoom Rooms with Neat devices in our offices and we are missing one option in our setup.We want to unhide non-video participants of meetings by default - is it somehow possible? We know that in the meeting we can do it manually, but we did not find a way how to set up for every planned meeting. Thank you for all answers,D.