Meetings

hello,the new transcriber efficiently shows the live hebrew transcript of zoom meetings, but when coming to the saved notes, it somehow ignores all the saved data and shows the “original” transcript in different languages which are not hebrew.seems like a bug- it sould be possible to see the original transcription effectively. please fix it!

Zoom training materials on breakout sessions (bottom of final page of pdf found at https://oit.pointloma.edu/wp-content/uploads/sites/2/2021/05/Zoom_Managing-Breakout-Rooms.pdf and included below) indicate that it is possible to obtain attendance reports of breakout rooms if attendees register for the meeting.  We have been unable to figure out how to do that - attendee report does not appear as an option for meetings, and there are no reports identified as related to breakout rooms. The only choices we see are registration and poll reports, but we need an attendee report (could be for the entire meeting - doesn't have to just be the breakout sessions during the meeting).Would appreciate any and all help with this.Thank you!!

Hi! The "raise your hand" button is missing for me...When I click on the participants button, I should be able to raise my hand by a button on the bottom of the list of the participations but there is no such button, only to unmute me and to invite someone to the session. Does anyone know where this button is in my case? Kind regards!

Zoom shows a bright border around my screen when using.  How do I turn off this border? 

Currently using Arch Linux with Wayland.  With the latest zoom installed (6.6.0), using pipewire for sharing.  The first time I try to share a screen or window, it works fine.  If I stop sharing and try to share again, it only shares a completely black window or screen.  Immediately after I stop sharing the first time, I get the following messages in ~/.zoom/logs/zoom_stdout_stderr.log*** pw_stream_set_active called from wrong context, check thread and locking: Operation not permitted *** impl_ext_end_proxy called from wrong context, check thread and locking: Operation not permitted 'this->recurse > 0' failed at ../pipewire/src/pipewire/thread-loop.c:62 do_unlock()I cannot figure out if this is a zoom problem or a pipewire problem.Everything works fine in X11.

I’m encountering an issue with Zoom  and my Plantronics Bluetooth headset for audio and microphone use. The headset works perfectly with other applications like Google Meet, You Tube, etc so I believe the device itself is functioning properly.Here’s what I’ve tried so far:Reviewed and followed all relevant Zoom support articlesChecked audio settings within Zoom and selected the correct input/output deviceVerified that the headset is connected and set as the default in the system audio settingsUninstalled, Installed, Restarted Zoom and my computerI show the green bars when conducting the testing but I cannot hear the sound or recordingSystem: Window 11PC: Lenovo ThinkpadDespite this, Zoom does not play or capture audio through the headset.Do you have any additional troubleshooting steps or suggestions? Any support would be greatly appreciated.

I am taking a class via Zoom, but I do not want to download the app to my laptop. I prefer to use it in the browser window. However, I cannot find a gallery view option in the Zoom screen. When I open the settings, there is nothing there, nor is there the icons in the upper corner like I used to see in the app at my old job. Is there no option of using gallery view when on your browser? It is very distracting to have the speaker constantly changing any time someone coughs or moves their chair or something.

Experiencing a regression since upgrading from 6.2.x to 6.3.10.7150. When I share my screen, the first time it works as expected. The second time, it just shares a black screen. If I force-kill the zoom client, and re-join the meeting, I can share again.  

While on meeting it suddenly gets stuck, disconnects and says preparing meeting and shows cannot connect to network with error code 104103. But my network is fine as i tested with other websites and apps which works fine. Issue is only with zoom meetings. I tried to uninstall and reinstall, clear cache and cookies and data. Nothing worked. 

How do I hide the speaker's thumbnail image from those attending the meeting, while sharing a image or video etc?  This is especially needed when using the share screen alongside the speaker two images side by side) or when the speaker is superimposed onto the shared image. In these share modes there is still a floating thumbnail of the speaker on a mobile device or they appear at the top of the screen along with other participants. It looks silly having two views of the same speaker.How do I hide the thumbnail view, when the other screen share views of the speakers are being used? 1

カメラが起動せず、ミーティング時に自分の顔が表示されません。今までは使えていたのですが、先日いきなり真っ暗になってしまいました。バーチャル背景等も映らず真っ暗な画面のままです。再起動、デバイス側の設定の確認、再インストール等も試しましたが、解決しません。他のアプリ（GooglemeetやMicrosoft teams、Windowsのカメラアプリ）ではカメラが正常に使用できたため、カメラの故障ではありません。マイクは問題なく使用できます。カメラだけがどうやっても真っ暗なままです。対処法をご存知の方いらっしゃいますでしょうか。

Hi,I have just bought the upgrade to do real time translation but I have no idea how to turn it on so I can use with my meetings to another country. Any help would be appreciated!

I have regular all-day staff meetings on Zoom and for much of those 6-8 hour meetings, I do not need to be listening to the meeting but I need to stay connected. This makes it impossible for me to do other work involving listening to audio from my browser in other apps, reviewing videos, and being able to generally use my computer while staying connected to the Zoom meeting but muting the meeting. I am not asking how to mute my own microphone. I need to mute everyone else talking when I don’t need to be listening. There doesn’t seem to be a button for this and either I just don’t know how to do it, or it doesn’t exist as a feature and it absolutely should. How do I do this? 

As I read the Community discussions on this topic, most of the posts on this topic range from 8months to years old. Has there been a workaround found to stop these people?  Has Zoom figured it out? I feel like i missed something...has anyone had any luck detering these people.I thought surely if participants could enter the waiting room with thier video on instead of a profile picture, that would solve it…..but Zoom hasn’t figured out how to do that I guess. 

The Auto-Generated Closed captions are a very useful tool on meetings, and I know that we have the ability to save the transcripts. I would like to see an option to automatically save the transcript of meetings, differentiated based on whether I am a participant or host. Or at least a prompt. As it currently stands if I forget to save the transcript before I leave a meeting there is no way to recover it.  Tyler

I record often and since just this week, my RECORD button is no longer where it used to be. It used to be between SUMMARY and REACTIONS in the lower bar in the zoom meeting window. I've looked for ways to add it back, but have had no luck. Any help? 

Дніпровська міська рада є органом місцевого самоврядування м. Дніпра, Україна. Ми використовуємо платформу для проведення онлайн-засідань сесій ради вже понад рік. Нажаль, програма не має у налаштуваннях української мови та не розпізнає літери української абетки. Під час онлайн-трансляцій, в імені користувача програма замінює українські літери на знак "*". Також на записах подекуди повністю відсутні імена користувачів у їх віконцях. Ми вже неодноразово звертались із цією проблемою до вас.  Просимо вирішити її та додати до програмних налаштувань українську мову, адже мова є невід'ємною частиною української нації!Заздалегідь вдячні. The Dnipro City Council is a local self-government body of the city of Dnipro, Ukraine. We have been using the platform for online board sessions for over a year. Unfortunately, the program does not have the Ukrainian language in the settings and does not recognize the letters of the Ukrainian alphabet. During online broadcas

从中国大陆无法加入会议，显示错误代码33002，什么原因，如何解决？本人系付费账号，中国大陆参会者无法登录zoom、不登录zoom的情况下通过链接直接入会显示“无法加入会议，错误代码33002”

Hello,So up to now I've been able to use a Rode Video Mic-Me USB-C external microphone on Zoom calls with no issues.  I log in via the Zoom App on a Samsung Galaxy S25 Ultra (Android).  After a hiatus over the holidays, however, when I plug this mic before/during a Zoom meeting I get a pop-up stating the video cannot be turned on and that I should check if other apps are using the camera.   The microphone works fine when recording video on the native camera app while not on a Zoom, so I know it's not Android OS or my phone causing the problem.  Also, I plugged in USB-C earbuds during a Zoom meeting with no issues, so I know its not just any USB device blocking the camera - only my Rode mic Moreover, if I start my own Zoom meeting, the camera works (I can see myself) until someone else joins, whereupon the outgoing camera completely shuts off and I receive said error msg.  While I can se

Several times now, a recurring meeting after several successful meetings becomes invalid. The recurring meeting is not listed to be reinstated. Why?Information on the web states that a link becomes invalid because it had been deleted. The host tells me that she did not delete the recurring meeting.Any ideas why?Do alternative hosts have the ability to delete a recurring meeting? 

Hola, tengo un problema con las grabaciones de zoom por correo. Al momento que configuro mi grabación de zoom, lo pongo a petición para que mis clientes antes de ver la clase grabada se registren primero para luego aprobarlas manualmente. Pero el problema está cuando les apruebo... les llega un correo con el link de la clase y es ahí que ese link mis clientes lo pueden compartir con otras personas quienes los pueden ver sin ningún registro y eso es lo que quiero evitar.¿Como hago para que ese link vuelva a solicitar solo el correo de la persona que está autorizada en ver la clase y así evitar que cualquier persona lo pueda ver? Saludos

Chào cộng đồng / Bộ phận hỗ trợ Zoom,Tôi đang gặp phải một vấn đề nghiêm trọng khi cố gắng đăng nhập vào ứng dụng Zoom của mình. Sau khi nhập đúng địa chỉ email và mật khẩu (hoặc sử dụng phương thức đăng nhập khác), tôi liên tục nhận được thông báo lỗi với mã 1132, và không thể đăng nhập thành công vào tài khoản.Thiết bị đang sử dụng: MacBook Air M2Hệ điều hành: macOS Sonoma 14.5Phiên bản ứng dụng Zoom: 6.5.6 (60177)Thời điểm xảy ra lỗi: Lỗi này xảy ra mỗi khi tôi cố gắng đăng nhập.Các bước tôi đã thử để khắc phục nhưng không thành công:Kiểm tra kết nối Internet: Đảm bảo kết nối Wi-Fi ổn định và thử với các mạng khác.Khởi động lại MacBook: Đã thử khởi động lại máy nhiều lần.Cập nhật ứng dụng Zoom: Đảm

Hey Zoom Community, Has anyone ever successfully figured out how to appeal a 1132 error code or been able to contact an actual support agent from Zoom? I'm getting increasingly frustrated with Zoom because I need it for my job, yet when I "appeal" the error code, I get a generic response from no-reply email saying I violated the terms of use, which I did not. I thought I would be able to call Zoom support to talk to an actual worker, but it seems that Zoom makes it literally impossible to talk to an actual agent. I'm extremely disappointed with Zoom and, quite frankly, amazed at their ineptitude. If anyone has a solution to this issue that would be great. The only thing I can think of at this point is to buy a new laptop and use a new email to sign up for Zoom because they also ban your MAC address. Thanks

Could we get a notification sound for when a Meeting Breakout Room participant clicks "Ask for Help?"Invariably, I'll be standing up stretching or working on something else when I've been kicked out of a Breakout Room. It would be immensely helpful to have a "ding" or other notification that the request to come back into the Breakout Room has been clicked. Thanks!  Karl

I have a MacBook Pro and Chrome browser that I am using for a live music recital.  I struggle with knowing exactly how to set up the meeting with the correct audio settings for the Listener/Viewer.  Do I determine the correct audio settings when I create the meeting or when I actually begin the meeting?  I did this before and something wasn’t right but couldn’t determine what exactly was wrong. Grateful for some guidelines.Ed