Meetings

I recorded a 3 hour zoom interview for my work, no error messages popped up while i was recording, i could see the person i was interviewing and they could see me. All seemed fine, the internet lagged a bit but thats happened before, and no problems. I convert the video to quicktime, and i just have a black screen, I have all the audio, but no video until the last 8 minutes at the end, where it suddenly comes back. This has never happened before to me, camera light was on so it must have been recording right? How the hell do i get the video, this was a once in a lifetime interview, not going to get the same emotions and dialogue again. Zoom has messed with my job - please tell me there is a way to get this video back. I'm on a Macbook pro, i have done loads of zooms in the past with no problems - what the hell happened????!!! I am very stressed, any help would be appreciated. If no help co

Hello, Let's say: John has a Zoom account and organizes Zoom meetings, John asks Dan (the developer) to fetch attendees data from a Zoom meeting ID 123456 and post the data on a website Dan develops. However, John does not want to give Dan the access to his entire account via Sign In or via API. John only wants Dan to have access to a single Zoom meeting. I understand that I ("Dan") can create a Zoom OAuth App but it seems that it then gives me the access to all John's meetings, which is not what I need. Could you please guide me to the correct way to fetch attendee data only from a single Zoom meeting from from another person's Zoom account? Thank you!

Hello All!   Looking for an answer. I am the meeting administrator for my organization. When I schedule a meeting and pass along the "invite link" to my participants, they all come across a window asking them for a "pass code". In the past we have never needed a pass code and users just clicked the link. I looked at my meeting setup and the checkbox for the option of requiring a pass code is greyed out. (See attached pic).  How can I create a meeting with an invite link that doesn't require a pass code? Thanks for your help!

I installed zoom on my freshly installed ubuntu 22.04 LTS and I faced a issue where i was only able to share whiteboard instead of my screen and there is no option other than that. How can i enable screen share? Is there any problem because ubuntu adopted wayland instead of xorg?

HelloSince I have my new computer with windows 11, the setting "original sound for musicians" in zooms does not work anymore. In detail, we can hear each other speak but the music sounds seem to be submitted by my laptop. Despite that I have the mode "original sound for musicians" switched on, my music teacher cannot hear me play. I read that some others experienced the same problem but none of the suggested trouble shootings helped so far. Interestingly, with Skype the sound is worse in general, but the music is transmitted, so I would not suspect a problem with my laptop in general but rather problem between zoom and windows 11....Anyone who can help with that?Best and grateful for any input!Josefine

Hi Everyone,      Recently zoom workplace app doesn't work on My Macbook. (It works well last year)It shows  cannot sign in on the app however I can log in on the zoom website.It is also fail when I tried to join a meeting by using zoom app. I can join a meeting on the zoom website.My environment is MacOS Ventura version: 13.7.4Zoom app version: 6.3.10 (49367)Anyone knows how to fix it?Thanks!

When I use my Logitech Brio webcam in Zoom on my laptop (Dell Vostro 5502 - Windows 10), and I am wearing a striped or patterned shirt, the shirt appears to be moving or vibrating - see attachments, I know it sounds weird, but it is very distracting to everyone on the Zoom session. It does not happen with my Logitech 920 on another computer. It does not happen on my iPad. And it does not happen in the laptop camera app. I have manipulated every video setting in Zoom, to no avail. I have spoken with tech support from Logitech and Dell. I followed every suggestion they had, to no avail. No one has any idea. Does this happen to anyone else? Do you have a suggestion that I can try? Thanks very much.

I want to increase teh number of participants on one page from 25 to 49.  How do I do that? 

Is there any way to get an itemized report of breakout rooms and each room's participants? I searched for this topic and found this thread, but it's from last year and I want to know if this has changed.   If not, has anyone found any workarounds to this? This is for a speed matching-type event, so keeping track of breakout room participants is key.   Thank you,   Robert

I recently tried to have a meeting and when I joined, the host couldn't hear me and I couldn't hear him. I tried every fix I could come up with in the short time before we gave up. I tested the audio devices in the app and they worked. I checked permissions and whether my audio was turned up. I looked to see if either of us were muted in the app and there was no indication of that. I restarted my computer. I re-installed zoom. I used the browser instead of the app. I used a different computer. I used my phone. I used multiple audio devices on each of the computer/phones I used. And I've used each of those devices for a hundred or more zoom meetings before this so I know my computer can handle it. And the host has regularly used zoom to record meetings as well and said he'd never encountered this problem. What else was there I could do?

I cannot connect to Zoom on my iPad Air Gen 5. When I start the app does not show the normal start up screen with New Meeting, Join, Schedule and Share Screen. When I try to sign in I recite every the message “Cannot sign in, please check your network connection.” I have reset my iPad and uninstalled/reinstalled the Zoom Client app with no success. I noticed the Zoom app is not listed under iOS settings under Privacy Microphone or Camera so I cannot give access to them for Zoom. Zoom works fine on my iPhone 13 Max Pro and Zoom shows under its Settings for Microphone and Camera. Is Zoom not installing properly?

My Zoom plan is workspace pro.  The host is on a laptop connected to a large screen so everyone in the room can see what is being presented.  I join the meeting with an Android and I we are on speaker mode.  The visual from my camera is very clear on the laptop yet very fuzzy on the large screen. I have turned on HD video on my Zoom account, and played with settings on the laptop, the screen, and my phone.  What else can you all suggest?

Hi! Since 6.4.10.2027, and still on 6.4.13.2309, settings' screens are broken on the layout: they show half the settings like shown at https://pasteboard.co/eP6kL7lnJKmp.png   

"report/webinars/#{zoom_api_uuid}/participants?include_fields=registrant_id", account_id: zoom_account_id We are taking leave_time only if id is present in the participants response.for few users we are getting participant_user_id and id. But for few users we are not getting. Help us to understand what is the reason.

New to Zoom...Was setting up a 1:1 meeting. The participants name did not show up in the participants panel. It showed up as "Admin". I was the Host. Not sure why the Participant showed up as "Admin". Please advise. Thank you

I've been using the official Linux client of Zoom for a while on Fedora and one the most frustrating things is the misalignment of the reactions popup when the chat window is docked to the main meeting window.  It always centers over the edge which often times makes the right most emojis cut off the screen. I have to drag the window leftward in order to display them all. It would be ideal if this popup always remained inside the chat window so it never expands beyond the window.  Is this possible?Zoom Version: 6.5.0 (2465) RPM package downloaded directly from zoom.com (not Flatpak)Fedora 42Kernel 6.14.11-300.fc42.x86_64Gnome 48.2Wayland Window Manager

I hold weekly office hours in Zoom, ranging from 60 to 90 minutes. They are drop-in sessions. Today two students dropped in right at the start, talked with me for about 5 minutes, and then exited. There were 55 minutes left in the session. But because of this feature, the session automatically ended after 40 minutes and I wasn't able to re-start the session. The result is that if any students wanted to join me toward the end of the session, they can't. This is a ridiculous feature. Please fix it.

I need to know if there is a security setting whereby if I, the host, lose my internet connection, that the participants in my meeting are disabled from interacting with one another or completely removed from the meeting.  I have read other posts dating back to 2023 on this topic but there doesn't seem to be an answer. This is deeply concerning to me for the work that I do.

I have private messaging on in my profile but I still can't send private messages in my meetings which is very important when my meetings are conducted.  

When I follow the meeting link, it says wait for host but I am the host

I currently have a Pro license, and I'm running an upcoming event that will have both concurrent Meetings and concurrent Webinars. I know I need individual licenses for each one that runs concurrently, but I'm trying to figure out if I can simultaneously run a Meeting and a Webinar using the same account/email address, presuming I have the Webinar add-on.  I won't be presenting--just the behind-the-scenes administrator for all of the sessions.   

Good morning everyone, today I attended like a Zoom meeting as a participant. How do I set up my meetings, so that the participant only sees the three buttons: chat, raise hand and question and answer.Thanks who answers me

Hi, We use LTSP on Debian GNU/Linux 12 (bookworm), up to date, with last zoom version. Since few week, zoom work perfectly, but now when a user log in to zoom :  /home/[user] disconnect from the server, and it's unreachable. A little video to explain here : https://www.swisstransfer.com/d/b63140b8-7a96-4972-ab20-b794558eea1b Any idea ? In case of, zoom log : root@vterminal:/home/justin/.zoom/logs# cat cef.log[10298:10348:0707/202913.138321:ERROR:components/password_manager/core/browser/password_store/login_database.cc:1127] Unable to open the password store database.[10298:10348:0707/202913.138429:ERROR:components/password_manager/core/browser/password_store/login_database_async_helper.cc:87] Could not create/open login database.[10298:10337:0707/2029

Zoom 6.4.12macOS 15.5 In a recent upgrade Zoom has resumed its normal bad behavior by launching on macOS login. I do not want this for myself for my 60 coworkers. Zoom should only run when the user wants it to run. I do not see any of the normal ways to have it not run on its own. I assume if I remove the LaunchAgent it will just create it again. I thought that Zoom was over breaking macOS conventions and sticking its nose where not wanted. I've checked macOS user launch settings, the icon in the Dock, and settings inside of Zoom Workplace. When I see this sort of behavior there is no way in heck that I would consider buying a Zoom product, such as a Zoom phone system. Hopefully there is a simple solution and I'm just overreacting. But while I at it how do I remove the AI Companion ad from Zoom Workplace window?

Dears,I am using Kali Linux 2025.2, the latest one, and having a  problem with this one, and I have to exit and rejoin the zoom meeting.When I was using 2024 Kali, it was working fine. Here is my kernel version└─$ uname -arLinux 6.12.25-amd64 #1 SMP PREEMPT_DYNAMIC Kali 6.12.25-1kali1 (2025-04-30) x86_64 GNU/Linux Please, this is irritating, please help.