Meetings

When joining a meeting, there is an error code 13215 displayed. We are not sure what the cause. Would you pls help me to solve the issue. (Zoom accout have been paid)

Hola a todos espero que alguien me pueda ayudar, tengo un problema y es el siguiente, al momento que estoy compartiendo un video o un audio en una Reunión, este le suena mal a las demás personas como si tuviera una distorsión, yo la puedo escuchar bien, pero los otros no. Ya reinstale la aplicación en mi pc, hasta formatee mi pc haber si así mejoraba pero nada, espero que alguien me pueda ayudar a encontrar una solución ya que me perjudica esto por mi trabajo.

I used the Zoom Outlook Plugin to schedule a meeting. Before the meeting took place, I moved the meeting time till later that day. Once I hit the Send Update button, this message popped up "The event description will be replaced with the Zoom default invitation" (see attached screenshot). So, now the meeting no longer has the agenda text (event description) that I had originally included (so that attendees would know what the meeting was about).   Any ideas on why this happens and more importantly how to prevent it in the future?   FYI, this happened to me with a previous rescheduled meeting too and I've been searching around for this Plugin message without success.

Zoom 6.6.0 and earlier 6.x versions suddenly stopped playing back stereo audio on Linux. I have original sound for musicians enabled and stereo audio selected. It does not matter if high fidelity mode or echo cancellation are enabled. Other people in the meeting get stereo audio from me, but I am only getting mono back. The other side has stereo audio enabled and other meeting participants can hear them in stereo quality.The Linux audio system seems to work fine: When connect a DAW like Reaper instead of Zoom to the same audio ports, stereo audio is recorded and sent back.I am using Ubuntu Studio 24.04 with the default Pipewire sound system.

I have a Zoom meeting with a panel of three to four speakers and two people doing signing. The people signing will be changing every 15 minutes. My plan is to spotlight all of the panelists and the person who is actively signing. I planned on using "Replace Spotlight" when they pass off every 15 minutes. I cannot see how I can designate who the new person is replacing when I hit "Replace Spotlight"; it removes all Spotlights and just makes the new signer as having the Spotlight.  Looking for a solution. Hope this makes sense.

Dear Zoom Support, I am a licensed paid Zoom host, and I am experiencing a serious issue with annotation tools on the Android app. I no longer have access to the Text (T) tool or the full set of 12 colours when annotating while sharing my screen. My annotation options are now limited to Pencil, Spotlight, Pen, Highlighter, Line, Rectangle, Oval, Undo, Redo, Clear, and only 5 colours (yellow, green, red, blue, black). This happens on both my Samsung Galaxy Tab A9 and Samsung Galaxy A73 phone. I have already tried uninstalling and reinstalling Zoom, but the issue remains. Strangely, my students still have access to the Text tool and more colours on their devices, while I do not, even though I am the paying licensed host.  This problem makes it very difficult to run my classes, as I rely on annotating shared documents (not the whiteboard).

Hello,I want to set up a recurring meeting with no fixed time, as I have done multiple times before. But the option seems to have disappeared, I can only choose recurring daily, weekly or monthly. I contacted support, but got no reply. Does someone in this forum have a tip for me how to fix this?

We’re hosting a large Zoom conference that requires registration. Every time someone registers, Zoom sends out the confirmation email with their unique join link and the Meeting ID/Passcode.The issue is that for this event, the Meeting ID/Passcode won’t work. Attendees must use their unique join link. Some people see both in the email and get confused, then end up locked out.I’ve been digging around in settings but it looks like Zoom always includes the Meeting ID and Passcode by default. Is there any way to turn this off, or at least stop Zoom from sending their confirmation email so we can handle our own through Zapier?Has anyone here managed to override this or found a good workaround?Can I turn off the emails from Zoom since we already have separate emails sent out with their unique Zoom links?

I was designated as a Panelist on a recent Zoom meeting where I was to share my PowerPoint with the audience.The Host and I did a “sound check” before the start. I was able to click on “share sound” and my PowerPoint. The Host confirmed that she could see and hear my presentation, as well as the sound of the embedded videos.Then the Host asked me to stop sharing so she could verify if her PowerPoint was working. After she did this, I went back to my presentation and found that I could no longer share my sound. I could see the option to share, but I couldn’t click on “share sound”. Also, the choices for screen sharing had decreased.I was able to share my screen, but could no longer share my audio. What would be the solution to this problem for future reference?I’m using macOS 15.6.1 (24G90)Thank You!

I received an invite and the email says I have to "view invitation in 10 days". Just wanted to confirm, is this link malicious? https://zooommeetiing.com.es/

We are currently working on a project in our team where we need to transfer video recordings from Zoom Cloud to our own servers. Our plan is to use the Zoom API to download and then delete these recordings. While testing, we found that the API endpoints which return download links for recordings respond with an error about missing scopes (e.g. [cloud_recording:read:list_recording_files, cloud_recording:read:list_recording_files:admin]). However, when we open our app in the Zoom Marketplace, we cannot find these required Cloud Recording scopes in the Scopes section. Our current app is of type Meeting SDK, and from Zoom documentation and community discussions, it seems that Meeting SDK apps do not support Cloud Recording scopes. Instead, the app type must be Server-to-Server OAuth in order to use these scopes. Could you please confirm if this is the reason why we cannot add the Cloud Recording scopes? And if so, is the correct approach to create a new Server-to-Server OAuth app for ac

Hey everyone, I’m trying to capture Zoom’s post-quantum TLS traffic with Wireshark, but so far I haven’t had success. Setup:Windows computer hosting the meeting (E2EE enabled).Another Windows device acting as an access point (via hotspot).Pixel 8 running the latest Android version, connected to that access point.Wireshark is capturing traffic on the access point’s interface. What I tried:Started a meeting on the Windows host.Joined the same meeting with the Pixel 8 through the access point.Captured all traffic and checked the TLS ClientHello/ServerHello messages.Result:All Zoom TLS traffic appears to be non-PQC.However, the in-meeting green shield does show “Post-Quantum End-to-End Encryption.”

The zoom microphone does not work on my laptop. The zoom speakers do work.I have carried out trouble shooting and in my laptop settings it gives zoom permission to use it. I have tried all the trouble shootings, none solved this issue.My laptop microphone has been tested and it works. There is no reason why after checking everything is correct why there is no sound from the microphone. When I test it it is silent.Any suggestions?

I have an older laptop with Windows 10 (which for some reason can't be upgraded to Windows 11).  I take voice lessons via Zoom and lately my teacher can't hear my high notes.  I tested them under my Zoom settings and sure enough, nothing after certain pitches, so it's definitely a clipping problem.  First, what can I do?  And secondly, if it is solveable, could I get specific steps to solve the problem?  Thanks in advance!

Tengo instalado en mi MAC la app ZOOM versión 5.11.6. Al entrar con mi usuario y contraseña me piden actualizar a versión 5.15.12 o superior. Pulso botón INSTALAR y me sale mensaje "no es posible", código error 10004. Lo intento otra vez y me sale el mismo mensaje

Hi, I have a 3 month old ASUS 15 OLED X1505ZA laptop. Good Spec. No problems with speakers when using Youtube. But the laptop speakers or any other speakers simply won't work with Zoom. Doing Test Speaker doesn't work, it maybe plays for 0.5 second before cutting out or may play but incredibly quiet. I have checked volume levels. I even went to see if some new drivers would work for audio components, makes no difference.I work in tech so am not computer illiterate, but I am baffled by this.Any ideas? Thanks.I've tried the following suggestions but with no luck.Update drivers: Go to Device Manager → Sound, video and game controllers → Right-click your audio device → Update driver.Check Zoom audio settings: In Zoom, go to Settings → Audio → Speaker/Microphone, and test each device. Disable “Automatically adjust microphone volume.”Set default audio device: Right-click the speaker icon → Sound settings → Output/Input, and set your main dev

Buongiorno a tuttiieri ho modificato la valuta di pagamento.Oggi devo acquistare Large meeting, ma dal mio profilo non posso acquistare nulla.Qualcuno può aiutarmi a capire perchè?GrazieCristina

I have had an issue on my chromebook (Ideapad 5, 2 in 1) and phone (motorola 2024 razr plus) where I can no longer see or hear the other members of the zoom meeting. I am also unable to see the screen that is shared despite the host resharing it multiple times. I initially had this issue while using zoom on google chrome on my chromebook while using wifi, then I switched to my phone on cellular data and had the same issue. I left and rejoined the meeting several times, restarted the browser, checked my settings and reset them to default, erased my browser cache, and downloaded the app on my chromebook and continued to have this issue. I was only able to hear and see participants when I was in a breakout room with two other people. Once I was back in the main room with the whole class, it went back to the problem above. I had no issues joining on these devices previously, and last was in class a couple days ago with no issues. 

Hello there, so whenever I open the zoom app I can't join meetings nor can I get to settings the software just lets me sign in but I can't do anything with it, and when I try to join a meeting it just shows the loading sign. Any help? Thanks!

Hi All,Multiple users are dropping on zoom call automatically due to auto update, even users are in supported app version and also there operating systema updates are up to date with proper network stability.If users are already on a supported Zoom version, should the client auto-update to the latest version during an ongoing meeting?Regards,Vinay

HI, I just had a very important meeting and recorded the same. But now my recording is no where to be found and I dont what to do. 

In a meeting with multiple participants, I joined using a guest account. One user is sharing their screen, and I want to record only that person.Last time, I pinned the user to keep them fixed and recorded.When screen sharing started, I switched screens using the top tabs to ensure the speaker remained visible.However, when reviewing the recording, it switched to recording the shared screen the moment screen sharing began.Please advise if there's a way to keep only the speaking user fixed and recorded even when screen sharing occurs.

As a sign language interpreter on US money map, the recent Zoom updates have become problematic for me. When I sign the number 10 (which looks like a thumbs up), a thumbs up emoji appears on the screen. Additionally, if I sign with two thumbs up, I get fireworks. This is extremely disruptive, especially when I’m interpreting sensitive topics.I need to turn off these reactions on Zoom immediately! Any advice on how to do this would be greatly appreciated.

Hey all - Today, in two separate meetings, I (co-host with Original Sound for Musicians ON), got the pop-up suggesting that I change my spoken language to Russian, as it believes I've started talking Russian. This is the first time it has happened, and now it's happened twice. I do not speak Russian, nor was I speaking incoherently. I have a professional audio setup, so it wasn't background noise, music, or anything else that would be coming through the stream. It's distracting and I assume it's a bug with the latest release.

My locally recorded file is not converting. I've followed all the steps for a Mac in the support articles and tried to open the file with Transcode. I get a message saying, "cannot find the files to convert." This worries me as this was my son's first birthday Zoom call with our family. Please let me know how to retrieve this file.