Meetings

Once the zoom meeting ended, there was no pop-up window saying that the recorded meeting is under the conversion. I've been using Zoom Interpretation feature a lot for some international meetings. So, we prepare 2 PCs to record the zoom meeting with 2 different languages - One for the mother language, another one for the interpreted version-. As a participant, of course, I asked the host allow me to record and save the zoom meeting into my PC. I absolutely saw the host clicking "Yes" button so that I could started recording it. During the meeting, I found that the zoom meeting had been recorded (On the top, there was a green icon or something with a message like "it is recording" and at the bottom of the zoom meeting screen, pause/stop the recording was also activated) Once the meeting was over, there was a pop-up window to show the progress of the conversion on the host's PC. However, there was no pop-up window for the conver

I just set up a scheduled meeting on YouTube and i want to use custom live streaming, there is no problem at the very first time, but when i want to stream a new scheduled meeting, in the zoom app, i cannot set up new custom live streaming datas, because it wants to stream automatically with the settings before. How can i reset it?

System : Dynabook Portege X40-KOS : Windows 11Zoom version : 6.3.6 (56144) Zoom audio output is very, very low. I can hardly hear anything. Volume is maximized (100%) in Zoom as well as in the system. No problem with YouTube videos. Tried https://zoom.us/test also. Same results. However, in this I noticed that the output sound starts loud and clear but goes down within a second. Googled a bit and based on what I read, I tried the following in the zoom Audio settings    - Set signal processing by Windows audio device drivers too "off(Windows - raw)"   - Windows system audio enhancements to "off". Problem persists. How to fix this? Thanks

ビデオ通話を１時間するとしたら、必ず一回以上は落ちてしまいます。何が原因なのかわかりません。他のアプリやブラウザのツールなどは落ちることは、ほとんど無い、90%以上は落ちることはないです。ZOOMだけ調子が悪いです。どうしたら改善するでしょうか？

Hi,With the new feature added with v6.0.10, I can now configure the default settings of breakout rooms beforehand— thanks for that.Unfortunately, they still have to be "opened" by a Host or Co-Host every single time.Could you please add the option to have the rooms opened at the start of the meeting?Alternatively, adding the option to allow non-hosts to start them would also work 🙂Thank you

I have a Pro subscription. I host a meeting three times per week. Occasionally, it's as if I'm not the meeting owner of my meeting. The main way to tell when this is happening, is that I am unable to start the timer. When I click Apps, I am asked to purchase a package of apps. Then I check to see if I'm the host by checking to see if I can assign someone else as the host and that isn't an option.I try going into my account and at login, I'm asked to "Please check your other device." What device is this? I've tried checking my phone, my email but there's nothing there. Has my account been hacked?I've had non-host attendees that have been able to access Zoom features that I appear to be locked out of... AGAIN, this is an intermittent problem. What is going on?

Hi everyoneAny idea why Iran is not included in the registration lists of Zoom? every islands of the middle of nowhere is included, but Iran, is not!:)

I'm not really sure if it's a bug. However, I haven't encountered this issue before updating to version 6.3.6. So, I assume it might be a bug that showing double vision when writing on screen. Could you please check? Thanks

It has always worked for me, but now, when I click on the bar to be sent a code, it does not, so I cannot log in as I always have. I need this for work so I really need a solution soon. I work from home and holding my phone during sessions is not an option.

I teach an exercise class via music Sharing Music. Recently, we tried to hold the class in a gym with additional live folks. We needed an external speaker for the folks in the gym to hear. But, whether we plugged it in or used Bluetooth, the Zoomers could no  hear well. I think the music may not have been Shared when we plugged in the speaker. How can I use the music over Zoom and with a Mic? 

I have used a paid version, a different free version as well as being a participant on someone else’s Zoom call when the meeting ends at precisely 17 minutes. I wrote to Zoom support with no response from them. It possibly is a setting I need to change but don’t know where to look or begin. FYI, I am in Spain and using a VPN blocker so the IP address shouldn’t be an issue. Any direction would be appreciated.  

On one of the users iPhone , zoom for intune app doesn't have the PIP setting toggle option. He has the latest zoom version and in the phone general setting PIP is enable, also background refresh setting is enabled for the app. Tried uninstall and install the app, but nothing works. The PIP setting on zoom app meeting setting doesn't show up. Has anyone encountered the same scenario before and if so found any solution ?  Please help.  Thanks

I cannot deactivate the remote control in Linux with the shortcut key. It is not working. I need the shortcut key to work on Linux.

I started recording but forgot to end before I ended the meeting.  Will the recording save?   

Lots of people have discussed how to get audio files for each participant, and how to delete multiple meetings and even to set meetings to delete automatically after a certain time. Those aren't what I want, and I'm sure I'm not alone.1) Downloading - it like to be able to tick individual participant audio files so they get downloaded at the same time as speaker view, gallery view and the shared audio file. At the moment I have to download the bundle, then go to each participant audio file that I want and download them individually2) Deleting - for some reason the participant audio files are all huge (lots of silence recorded without compression) meaning a recent meeting had 1.5GB in video files but 3GB in participant audio files. Before I even want to download, I know I only want audio files for the main speaker and the facilitator. At the moment I have to go to each participant audio file individually, press the delete button, wait for it to delete, reopen the list o

Periodically, I am informed that my microphone is a little quiet.  I have unchecked "Automatically adjust microphone volume." (And this has been unchecked for the last year, and yet this issue has occurred multiple times during this period)  This is where I want my microphone level to beThis is where it is being to As you can see, it's really a minor change but it does happen I do have the Audio profile set to Medium  Is there anything outside of Zoom that might impact the level?  

Hi all,I can't remove a virtual background, although I've selected 'None'. I can freely select any other virtual background, but when selecting 'None' I'm back in the forest.I've logged out and in again, plus deleted and reinstalled Zoom.Anyone tried something similar and found a solution? Can't look like I'm in a field trip forever lmao/Alexander

I run a Mac (Big Sur 11.6) and give  Zoom talks using lots of photo images. Powerpoint runs ether slowly with lag between slide, or jumps slides. Is this a Zoom issue or Powerpoint?Thanks!

I lost recorded meetings due to a delayed payment as Zoom deleted them. Is there a way I can get them back? Please help. Wanjohi

I launched the app today to an unpleasant surprise - there seems to be no way to get my list of recurring meetings to show up other than from a tiny dropdown?  This is a terrible change for my use purposes - most of my meetings are "no fixed time" and I rely on being able to see and access that list easily throughout my work day as I meet with clients. The other thing I do at start is launch my personal meeting room for drop-in meetings, and that is also difficult to find and access. I do not want Zoom to manage my calendar, I do not want or need a calendar view, and now there is no option other than this useless view? I would like to have choice in what kind of display I have, because this is not it! Older questions about this kind of issue reference a "merge meetings and calendar tab" option in account settings, but this setting DOES NOT EXIST - I have searched the account settings using Zoom's search feature and it returns no results (see image 2 below). 

No text available

When in a meeting I have a square with a camera and a slash through the camera. How do I fix this so my meeting can see me and I can see myself?  I have tried settings and chats to no avail. Tami

During joining a conference via a link, the program first writes 'Connecting...' then this small window disappears, and it doesn't join the conference at all. The same happens when creating a conference. Could you please advise what to do?

Hello everybody.On my desktop I use Zoom and Voice Recorder butthe microphone does not work.Now the scenario is this:- I do not use headphones or external microphones- the Realteck audio application is installed on my pc- the audio drivers are up to date and I have no updates from Windows Update- if I use applications like Skype, Webex or Google Meet my microphone works fine- only with Zoom does not work, as for the Voice Recorder- needless to say I uninstalled and reinstalled Zoom and that my pc is spotless- the related privacy settings are all activated- I have reset all imaginable and possible settings.In short, I have tried them all and have not got out of the problem.But the funniest and weirdest thing is this: if I launch Google Meet and start a meeting, the microphone starts working both in Voice Recorder and in Zoom.In short, everythi

Hi For some zoom meetings I have gotten an email like this  https://yyyyy.zoom.us/my/some.random.name?pwd=xxxxxxxxxxxxx  Where there is not conference number, but there is some words like someone's name with dot.When there is conference number, then there is number with 10 or 11 numbers in length. And this url is like that ".../j/" I need to open zoom links with zoom.exe directly, using command line. I have the correct syntax for that. Zoom.exe "–url=zoommtg://yyyyyyy.zoom.us/join?action=join&confno=number_here&pwd=some_password"  But it does not seem to work with URL-s where there is "/my/" instead of "/j". Can someone tell me how can I open those URL's also from command line  ? Thanks RegardsRaul Kaubi