Rooms & Workspaces

We will have 50 people in a meeting and will ask them to break out to answer 1 of 3 potential questions; it's the attendee's choice as to which question/room they want.  Can we limit each room to 5 participants and have Zoom open a new room for additional participants that want to address that particular question?  Is there a feasible workaround to do this manually without taking too much time?

I never used Zoom beforeI want to set up a meeting with overseas relatives using my laptop with a speaker instead of headphones.There will be three of us sitting side by side acting as one participant (not separate participants) so we will have to shift the laptop some distance away so all three of us will be visible on overseas party's screen.Will laptop mic be able to pick up our voices from some distance away?We will be unable to reach the laptop to mute our mic when overseas party is talking. Can we just leave our mic un-muted all the time? Won't our mic pick up other party's voice on our speaker and transmit it back to him, and then back to us even louder, and then back to him even louder still, in other words setting up a vicious circle? 

Hello, We are launching zoom workspaces and also have the DTEN virtual kiosk setup.  What we are seeing is when a user books a station the kiosk wont reflect this for up to 10 minutes.  Is there any way to increase the refresh rate of the kiosk with workspaces enabled?  Has anyone else seen this issue?  Not so great when multiple people are trying to book a spot at the front desk.  Thank you

 Issue fixed. Can't find out how to close/delete 

Hello,I rent Neat bars from Zoom with 2 zoom room licenses.Haas licenses have been cut off to me and nothing works anymore.I opened 2 tickets on the support but no one at Zoom is interested.Has anyone had this problem before?Thank you Do you know how to terminate an equipment rental? because the sales people in France no longer respond

Ist es möglich ein vom MacBook Zoom Meeting auf den TV zu streamen und gleichzeitig am MacBook zu arbeiten? 

I need to delete 2 Calendar Resources from the Calendar Integration but the portal doesn't allow me. When I hover my mouse over the checkbox, it gives me a prohibition sign and I am not able to remove them. I am not sure if I should be removing them from another option instead of Calendar Integration.Here is a print screen. Thank you. 

The X50 has had issues recently with connecting to our video conference provider, whether it be Zoom or Teams. We've had this device up and running since mid-May and these issues just started happening. This isn't happening with any of our other X50s at our other locations though. Has anyone else experienced this?

I keep having issues with clients joining the meeting I've scheduled for them. I send them the invite link via email, but when they go to join the meeting it will say "host is in another meeting" and they can't join. Any insight as to why this is happening? 

I have a Room that is showing up under my Users (e.g. Admin -> User Management -> Users).This is showing as a Licensed User. I would like to (1) remove this room from our Zoom account and (2) free up this License. There is no option to disable or delete this from the location I described above or Room Management -> Zoom Rooms -> Rooms Can someone please point me in the right direction to delete this room and then free up that License? Thanks!

Можно ли убрать логотип zoom, чтобы при конференции его не было на видео.

When a meeting is scheduled from a Scheduling Display, the Zoom Room automatically adds the Room Meeting ID to that scheduled meetingSome of our users are confused by that, as the Room Meeting ID is then available to join by "one-touch", and that's not what our users want to see. They just want to be able to block out the time in the room WITHOUT applying a Zoom Meeting to that time period.We would like to have it be an option for a user to either start their own Zoom Meeting or manually start the Zoom Room Meeting ID for that meeting scheduled at the Scheduling Display. Automatically adding the Zoom Room Meeting ID  is not making it easier.Thanks.

I have an issue where under the device management, the device itself is showing "NOT connected to ZDM" . I do see the device under devices however on the DTEN screen it will flicker off and say  "not connected to PC". Do I have to reenroll the device? 

Hi, I am using Manycam virtual microphone mapped to my built-in microphone. While trying to use proximity detection/ultrasound functionality to connect to Zoom Rooms it just does not work. If I use built-in mic in zoom directly, it works. Any idea?  

I have setup many rooms with O365 Calendar intergration, but the Last Sync'd time doesnt seem to update (See attached) Is this normal, or is there a setting I need to change On the attached, is a manual sync, but I would have thought it does it automatically 

Hello, We are surveying how to support Smart Gallery for our hardware. Anyone know what's the specifications about Smart Gallery? How many multi-stream we need to output for zoom? What's content for each stream? Thanks.

How would I be able to turn a Zoom Room into a personal room for a user? I would like the user to sign into the Neat pad and be able to see their calendar integrated on the neat pad if possible. 

Saudações;Gostaria de saber se o sistema ZOOM oferece recurso com possibilidade de desconexão automática da reunião em horário definido. Gostaria de determinar um horário específico de desconexão com intuito de evitar que os participantes prolonguem a reunião além do horário definido.  Grato.    

Hi, Do you know how many cameras or participants inside of a Zoom Room can be divided in the Smart Galleria a Zoom Room?

Hello! We have some amount of Zoom Rooms in our company and wants to allow some users to be "invisible participants". And allow such users to connect to any of ours Zoom Rooms without any information to participants (even owners) of meeting. Looks like it is nice feature for security officers, HRs, system and network administrators and so on. Is it possible? Thank you.

BOM DIA A opção PARTICIPAR DE REUNIÃO p q eu digit o ID da reunião n aparece p mim. Obr. ATCANGELA

Hi all, I have purchased an Amazon Fire HD 8 with intention of using it as a Zoom Controller, but cant seem to find the zoom controller app in the Amazon App Store. Any help would be greatly appreciated

At my facility, we have iPad minis mounted in MagTarget enclosures mounted outside the Zoom rooms that display what meetings are scheduled in its respective room for the day.  Reservations for the Zoom rooms are done via Outlook.  Also, each iPad Zoom room scheduler allow users to reserve its respective Zoom room for an ad-hoc meeting when the Zoom room is available. My question is as follows:  Is there a way to disable the "Reserve" option on the iPad Zoom room scheduler so that one could not reserve its respective Zoom room using that device?  I tried looking in the Zoom admin portal for that option, and I don't believe I was able to find where the "reserve the room on the scheduler" option could be turned off.  Basically, I would want the ability to make the Zoom Room scheduler show only the meetings reserved via Outlook. Thank you.

Bonjour, J'ai souscris un abonnement zoom one pro et il nous est impossible de partager plusieurs écrans en même temps. J'ai bien activé la possibilité pour tous les participants de pouvoir partager mais rien n'y fait, je suis obligée d'arrêter mon partage pour que quelqu'un d'autre partage le sien.... les autres participants aussi doivent payer un abonnement pour que ça marche ? Merci pour votre aide PINTOR Laetitia

As of yesterday, all of my Avaya XT5000 conference systems cannot receive audio from meetings.  It can and will broadcast audio as I have joined the meeting from either a Windows Client or iOS client and both can 'hear' audio coming from my Avaya XT5000 devices but the Avaya devices cannot 'hear' anything coming from other joined clients.  I've verified that no mics are muted and no audio is muted either in the hardware or on the displays they are connected to. Nothing in my environment has changed either on the network side nor on the hardware side. Anyone else seeing this issue?