Webinars

I am a Spanish language interpreter. I interpret zoom meetings/webinars through a headset. I raise and lower volume on my headset or through the computer keyboard as needed. I don’t use zoom volume settings. Recently I zoom interpreted a live event in another city, which had a sound technician on-site. The sound was inaudible. The technician made adjustments which resulted in the sound being incredibly loud and impossible to turn down on my end. I could turn down in headset or on keyboard straight past the point (and icon) of silencing, and it remained loud as ever. Any thoughts or explanations ? Thank you 

I want to be able to show my webinar participants the live count of the votes on the poll - I'm sure I have seen someone do this but I can't find anything about it online. Would be very grateful if somebody could point me in the right direction.

Has anyone been experiencing the need to register twice for the same webinar? I hosted a webinar earlier today and found out that one or more of the attendees were required to register twice to actual join the webinar. In addition, I joined a separate Zoom webinar through a different company shortly after in which I had already registered, which is why it was on my calendar, but when I clicked the link to join was required to register again. It's really a bad user experience and I'm concerned it will deter people from joining in the future.  Is there some kind of setting within the setup that needs to be checked/unchecked? This is the first time I've run into this issue and I've setup and hosted many webinars via Zoom. Any feedback is appreciated. Thank you!

I have a webinar scheduled in a few hours but how do I actually start it? When I hover over the webinar name, it only gives me Start Practice Session, Edit, Delete.    

Hey there, I would like to know, if there is any possibility to track the number of Webinar Participants, who saw the sent recording. Normally we get in touch with participants and send them the Webinar URL as well as the password, in order to have an access to the recording.  Thanks in advance, 

I am hosting a webinar and our plan covers 500 participant capacity. We are recording the webinar and plan to share the recording after. Is there a limit on how many people we can share the recording with (i.e. can more than 500 people have access to the recording)? Or a limit on how many times people can watch it? 

BonjourDepuis plusieurs jours, j'ai des enregistrements affichés dans mon cloudQuand je veux les charger, tous les fichiers n'y sont pasComment faire svp ?Merci pour votre aide

Hi everyone!Does anyone tried to join a Zoom Webinar with your Apple Vision Pro? I tried a few times and it seems it doesn't work.Thank´s

I'm an admin of my Zoom organization. I recently received an email informing me that our recording cloud storage space is almost getting over.1. How can I access my team's recordings to be able to download and delete whatever's necessary2. How can I review the storage space I've used up so far and understand how much I have left?

How can I add other language in Interpretation menu ?

Я купил вебинары Zoom для 500 участников. Если я начну конференцию, соберется ли на конференции до 500 человек? Второй вопрос: что они могут делать на конференции?

Hi all. It looks like Zoom made a recent change to how polls are displayed. We offer monthly educational webinars and have polls specific to that webinar topic. When we enter in the polls for one webinar they show up in all the webinars now. This will get very confusing. Is there any way to not allow/disable this?  

I just had a quick question, for the Simulive webinars...for the pre-recorded video does it have to be a zoom recording? Or can another video be uploaded for the Simulive? Thanks!  

I recently created a webinar and its registration page. I am customizing the registration page using branding. While adding speakers, I mentioned their biographies in the bio section. The bio includes the "&" symbol, but after saving it, when I check the registration page, the symbol is converted into "&". How can this be fixed?   I have attached the screenshot below.    While adding :     On registration page :    

Hi everyone, I'm facing a recurrent issue when I use a Practice session...when panelists join they have the unfortunate tendency to click "Start the Webinar", and the consequence is that attendees could see and listen.Is there a possibility to remove this banner message on the top when practice session is running?? and let just the Host have the possibility to start the webinar...

When pulling registrant reports from Zoom Events, the data is sometimes in the wrong columns. Example: instead of job title, there's a phone number or instead of phone number, there's a zip code. There were issues with 40 out of 900 registrants for our last event. Has anyone else experienced issues with registration fields showing up in the wrong column in reports? 

I try to save Gallery view in settings for the recording but it always goes backt to active speaker.

During a 1-2 hour webinar, I have multiple attendees who will get kicked off the zoom webinar and will be unable to rejoin. What is causing so many people to get kicked off? Usually, we have anywhere between 200-700 people that attend our weekly webinars, and anywhere between 10-40 will get kicked out during the duration of the webinar. 

I currently anticipate 90 attendees, but what if the number exceeds 100 after I've already distributed the Zoom link? Can I promptly upgrade to accommodate more attendees, and will this upgrade affect the existing Zoom link?

I have just installed the new Zoom for Salesforce Lightning integration app into my Salesforce instance. Before this install I had created many webinars into the future the people are already signed up for. I don't see any mention in the documentation on how to sync these pre-existing webinars to Salesforce. There is no 'button' in the Zoom portal page for each webinar to 'sync to Salesforce'. And in Salesforce, I can only create new webinars which will automatically sync to the Zoom portal, but I see no place in Salesforce to grab existing webinars from Zoom. Is there any way to accomplish this?

I was in my Zoom account yesterday adding/editing webinars when I received these messages across the top that say:Adding Role sn_esm_user to (my user name)Adding Role task_acivity_reader to (my user name)Adding Role sn_apptmnt_booking.appointment_booking_user to (my user name)Adding Role snc_external to (my user name)Primary email device created for (my user) I was able to close them using the x at the end of each message but I have checked with others that are testing things with our API and others but no one seems to know what they are. 

I am taking a webinar. The teacher's face is always slightly blurred. Is there a way to fix this?

We have a webinar license and always use the practice session before allowing the audience in. Up to now, only the host can open the practice session while the panelists are directly put on a waiting list until the host is online. How can we prevent this and allow the panelists to open the practice session themselves? This is very useful as the host cannot always be available.Please describe the procedure to do it this way. I hope it's possible.Thanks

Is there a way to re-direct people that register for a webinar back to the next step in my funnel? context: I have a landing page with a pop-up, or a link to the zoom webinar registration page.  Once they register for the webinar, I want the system to automatically take them to the next step in my funnel before the scheduled webinar date. The setting in my account seems to only allow me to redirect someone after they've watched a full live webinar.  I need to be able to redirect them as soon as they opt in for it... Please help. 

My webinar panelist cannot log in to our webinar and is locked out after too many attempts. Can anyone suggest anything? Thank you!