Yealink SIP-T54W Cannot Get Into Admin Function After Provisioning

Forum|Forum|2 years ago
March 2, 2023
3 replies
18 views

Installed a new Yealink SIP-T54W phone, provisioned it with Zoom, and then I cannot get back into the admin functions within the phone. I have tried to change the password within the Zoom portal under Company Info -> Desk Phone -> Common Settings -> Admin Password, however, even after multiple reboots of the phone, it still says "Incorrect Password" when trying to log into the admin functions on the phone. Does anybody have any ideas as to what I am missing? Thank you in advance for your help, take care, and have a nice day! -- Ron

Best answer by FORE-Craig

Hi @RBKrisko

Perhaps I should have made it more clear that the important part of my instructions above is setting the User Mode to "advanced" on the phone. That User Name is associated with the Desk Phone Admin Password set up in the Zoom web portal for both the physical T54Ws and their web interfaces. If you walk through the steps that I described, you will understand.

You will have to do this each time the phone reboots, or the firmware is auto-updated. That is the way it has always worked for us on Zoom.

I hope that helps!

FORE-Craig

Specialist

Hi Ron, @RBKrisko

On the T54W, press the Menu button, then use the arrow keys to select User Mode. Scroll through the User Types until you see "advanced", arrow down to Password, and then key in the Admin Password that you set up on the Zoom web portal, and select the Save button. After that, you'll be able to access the functions under Admin in the menu using that password.

I hope that helps!

S

sachinzoom

Community Champion | Employee

@FORE-Craig But he will need to enter the admin password at the Advanced button, which is his issue.

@RBKrisko

My suggestion is to factory reset the phone. If you keep the OK button pressed, your phone will be factory reset and and it will provision back, register to zoom. Since you have the admin password set at web level, you should then be able to press the Menu -> Advanced -> Enter the admin password.

Also, You can also try logging into the phone Web UI ( find the IP under phones and devices ) to see if the phone has it correct

RBKriskoAuthor

Newcomer

@sachinzoom thank you for your feedback. I am trying to avoid factory resetting the phone, because it will simply happen all over again as far as I can tell. I am making that assumption, because I set up a second new phone, it provisioned with Zoom, installed a firmware update automatically, and then rebooted, but the same exact issue happened with this Yealink phone too where it now says that the admin password is incorrect. It is a vicious circle that I am not sure that factory resetting the phone will fix for either phone. This is why I am so very stumped here as to what is happening between these phones and Zoom upon provisioning, a firmware update, and rebooting. Thank you, take care, and have a nice day! -- Ron

E

enielsen

Contributor I

On our desk phones, we set the admin passwords in the phone templates rather than use the global password set in the zoom portal. We haven't had any problems using the admin functions in the phone with logging in.

I forget why we decided to do that, perhaps some of our older phones didn't "take" that global password?

RBKriskoAuthor

Newcomer

@enielsen thank you for your feedback. We hadn't considered doing that, but we will consider that now. Take care and have a nice day! -- Ron

Getting Started

Sign up

Login with SSO

Login to the community

Login with SSO

Scanning file for viruses.

This file cannot be downloaded