Zoom Room Activation - after firmware upgrade | Community
Skip to main content
S
Newcomer
Sachis
Newcomer
September 14, 2021
Question

Zoom Room Activation - after firmware upgrade

  • September 14, 2021
  • 1 reply
  • 0 views

Would like to know, does the Zoom room application requires to sign back in manually after a successful zoom room version upgrade? The version upgraded from 5.3.0 to 5.7.5 

      1 reply

      R
      Community Manager
      rn-zm
      Community Manager
      September 14, 2021

      Hi @Sachis, have you Enable Auto Sign-in? May have been disabled after the update. However, if you're seeing a "Cannot be assigned" if a Windows Devices isn't running Windows 10 or later, in this case, means you can not enable auto sign-in for this device. 

        S
        Newcomer
        SachisAuthor
        Newcomer
        September 14, 2021

        Hello @RN52_2 , Thanks for the reply.

        I am not using the Zoom ZDM here. Is that possible to enable the Auto Sign-in & can we achieve it without ZDM.

        And, the Zoom room is not showing "Cannot be assigned", it was showing as "Unlicensed Room" after a day or two of activating it using the code, in this meantime the device had upgraded its firmware to the latest version too so i am suspecting that the Zoom room has signed out once after the firmware upgrade and cannot signed back in automatically.

          shaneatzoom
          Community Champion | Employee
          shaneatzoom
          Community Champion | Employee
          September 16, 2021

          Hello @RN52_2,

           

          Yes, the workaround is entering the activation code manually in the ZR but i would like to locate the issue here. Is this happening because of the firmware upgrade? or the ZR image is acting unusually something here. 

          I can plan accordingly if this is the expected behavior during the Firmware upgradation everytime or something like a major version upgrade or need to follow any procedure before we initiate any  version upgrade.


          Hi @Sachis 

           

          We would not expect that rooms would be signed out after any firmware update.  However, if that firmware for some reason wipes out the existing app memory, it's possible that this would occur.  Again, it isn't the intent so this is unlikely to repeat.  If it does recur, please open a support ticket.

           

          If you are using ZR on PC, there is also a chance that you're engaging some kind of deep freeze that might be preventing this from working as intended.  If your rooms were working for some time before this, it's unlikely to be the case but I wanted to mention it just in case.

           

          Hopefully that's helpful and, again, please open a support ticket if this issue recurs.

          Terms & ConditionsAccessibility statement
          Copyright © Zoom Communications, Inc. All rights reserved.