cancel
Showing results for 
Search instead for 
Did you mean: 

On April 16, between 2:25 P.M. ET and 4:12 P.M. ET, the domain zoom.us was not available due to a server block by GoDaddy Registry. This block was the result of a communication error between Zoom’s domain registrar, Markmonitor, and GoDaddy Registry, which resulted in GoDaddy Registry mistakenly shutting down zoom.us domain. Zoom, Markmonitor, and GoDaddy worked quickly to identify and remove the block, which restored service to the domain zoom.us. There was no product, security or network failure at Zoom during the outage. GoDaddy and Markmonitor are working together to prevent this from happening again.

Switching "primary" screen in a DTEN dual screen Zoom Rooms setup

CRX_Paramount
Explorer
Explorer

We have a dual-screen Zoom Room, utilizing 2 DTEN touchscreens in what I believe is a DTEN configuration of dual screens.

We were wondering if anyone had any experience with this configuration and/or if there's an obvious Zoom Rooms setting such that the "primary" monitor can be swapped.

The reason for this is because the current "primary" monitor, meaning the monitor that has the Zoom Rooms controller panel, is having an issue with its touch capability. Rather than physically swapping the position of these monitors, and then come to find out that wasn't the solution, we wanted to find a configuration solution.

My guess is that it's a DTEN and/or Windows dual monitor setting. Just wanted to see if anyone in the community had any experience or could shed some light on this issue.

Thanks!

0 REPLIES 0