Yealink W80DM/B using W57R Cordless. How to connect?

[IGDAdmin]

Wanting some help with configuring the W80DM in a Mesh set up with the W80bs connecting back to the W80DM.

From what I have found on the FAQs it asks you to register the W80bs back to the W80DM. So I have completed this. But when looking to add the handsets I quickly realised that I need sip accounts for these devices? So my question is how am I meant to set this up as there is nothing documented on how to do this and yet all FAQs list the devices as supported? The W57R handsets have IPUI addresses but not mac addresses so the Alternative was to use the other device option within Zoom but that asks for a Mac address which this device does not have.

I assume I need to put the User email and password into the SIP account for this to work but I want an answer before I go back to the customer to try something that wont work

[Eliot]

hi @IGDAdmin 

please see this zoom support article.

Setting up a multi-cell DECT (Poly or Yealink)

see also yealink admin guides.

https://support.yealink.com/en/portal/knowledge/show?id=6458b6dab1fa936c57b56781

https://support.yealink.com/en/portal/knowledge/show?id=6458b6e2b1fa936c57b569d0

https://support.yealink.com/en/portal/docDetail?documentCode=a5147cd002d5219f

other yealink docs attached.

Did my response answer your question? If so, please don't forget to mark the reply as an accepted solution.

thanks,  eliot