cancel
Showing results for 
Search instead for 
Did you mean: 
The Zoom Community will be placed in read-only mode January 9th, 2026 through January 22nd, 2026 to deliver you a new and improved community experience!

The community will still be accessible, however, the creation of any new discussions or replies will be temporarily unavailable. We appreciate your patience during this time.

Bypass voicemail instructions

justinmarthaler
Contributor I
Contributor I

Is there a way to bypass the Zoom voicemail instruction prompt when you are routed to voicemail for a Zoom Phone user.  It appears that pressing the hash key (#) will bypass the personal greeting, but then the voicemail instructions still play.  Experienced callers don't necessarily want to hear the instructions every time, but I also don't want to eliminate the recording as newer callers may appreciate that.  

 

Thanks!

1 ACCEPTED SOLUTION

CosmicKitty
Zoom Employee
Zoom Employee

Hello @justinmarthaler ,

 

Yes, you can press *

Thank you! 😺

View solution in original post

7 REPLIES 7

CosmicKitty
Zoom Employee
Zoom Employee

Hello @justinmarthaler ,

 

Yes, you can press *

Thank you! 😺

justinmarthaler
Contributor I
Contributor I

Thank you @CosmicKitty   I thought I had tried that earlier without success, but I tried it again and it does work.  Pressing #* in sequence will get you to the beep pretty quickly.  Now, if it could be accomplished in one keypress, that would be even better.... 

CosmicKitty
Zoom Employee
Zoom Employee

Hi @justinmarthaler 

 

I tested this in my sandbox and I only had to press * and it worked for me. 

 

Thank you 😺

justinmarthaler
Contributor I
Contributor I

@CosmicKitty, may I ask how you have the voicemail setup for your account?  I have the settings to "allow callers to reach an operator" and "allow callers to check voicemail".  When I turn those off, it does indeed go directly to voicemail with the asterisk (*).  Is there a way to avoid the IVR experience while still allowing individuals to dial 0 to reach an operator?  We're transitioning to Zoom and our existing phone system allows this capability without the additional IVR step.  Having to press 1 to leave a voicemail (or wait a bit longer) is going to frustrate some callers.

Hello @justinmarthaler ,

After testing with those settings enabled, pressing * does not appear to work. Also enabling the option to dial 0 to reach an operator, the IVR menu also does not appear editable. I also checked account level settings to verify whether the menu is customizable and it is not. The account level setting is just a toggle button to enable/disable.

 

This seems to be a good candidate for a feature enhancement!

 

Thank you 😸

justinmarthaler
Contributor I
Contributor I

I submitted a feature enhancement request - Voicemail Configuration Improvements - personal IV... - Zoom Community.  Your vote is appreciated!

gdhanraj
Newcomer
Newcomer

Any update on this?