iPhone 14 Pro Max Original Sound results in very low level audio

[Seisiuneer]

Anyone using an iPhone 14 Pro Max (or any other recent model iPhone) for Zoom having issues with low audio levels when turning on original sound and using the built-in phone microphone?

If I don't turn on original sound, the microphone level is OK, but will not work for music over Zoom.

If I use my external USB microphone plugged into the iPhone and monitor with headphones plugged into the mike (Shure MV88+) monitoring jack, it works fine.

[Seisiuneer]

OK, here's the definitive answer to using an iPhone 14 Pro Max with Zoom on a music event.

While you are are in Zoom, before you switch on "Enable Original Sound" you <also> need to go in to your iPhone Control Center and switch the microphone mode from "Standard" to "Wide Spectrum" and then turn on "Enable Original Sound".

I was not aware this was even an option on iPhones, and it's not mentioned anywhere in the Zoom documentation for the app on iOS.

[MS9]

I have the same problem with iOS version. Although I already have "Wide Spectrum" mode before I switch on "Enable Original Sound", it comes "Turn on Wide Spectrum in Control Center" with only "OK" button. I tried it with a Shure MV88+ and a Røde VideoMic. Both of them didn't work.. It comes the same message.

By the way, without a external microphone it works with "Original Sound".

Can anyone save the problem? Or should I wait for a update?