Failed to convert recording | Community
Skip to main content
T
Newcomer
Tschigi
Newcomer
August 11, 2023
Question

Failed to convert recording

  • August 11, 2023
  • 2 replies
  • 32 views

I record my webinars via Zoom. Until now, these were converted directly after the end of the zoom meeting and saved as mp4. This hasn't worked since the beginning of the week. And each time at 70% conversion rate, everything stops and doesn't convert to mp4. There is enough storage space, and it's not due to the internet either. Why is that? The webinar recording lasts about 130 minutes. Thank you for your feedback

    2 replies

    R
    Community Manager
    rn-zm
    Community Manager
    August 11, 2023

    Hi @Tschigi welcome to the community! There could be a number of causes as to why you'd be having issues:

    1. Not enough available disk space to store the recording files on your device after successful conversion.
    2. You have configured local recordings to store on a file storage path that does not exist on your device.  Like a Network Drive.
    3. Conversion Files are not located within the folder created for the locally recorded meeting.
    4. Internal errors pertaining to the user's operating system and hardware.
    5. The device converting the local recording files enters ‘Sleep Mode' or is turned off mid-conversion.
    6. The default naming of the conversion files has been changed.

     

    You can attempt the following to see if you can successfully convert your recording:

     

    1. Initiating Conversion Using the Zoom Client
    By design, Zoom converts the generated recordings files immediately after a locally recorded meeting has ended. In some cases, this may not happen. Here is how in the Zoom client to initiate the conversion of these files:

    1. Log into your account within Zoom Desktop Client
    2. Access the Meeting tab:
    3. Select the Recording tab:
    4. Locate and select the meeting topic pertaining to the local recording:
    5.  Select Convert:


    2. Confirming Folder Location/Path of Recording Files
    When a locally recorded meeting is ended, Zoom will create a folder on the host's device based on a specified location configured in the client to store the recording files. To determine the default location where these recording files are stored check the following:

    1. Log into your account within Zoom Desktop Client
    2. Access the Settings of the Desktop Client:
    3. Select Recording and note the file path listed within the “Store my recordings at” field:

     

    Let me know if you were able to convert successfully after the above troubleshooting methods 🙂 If not, I may have a couple more tricks we can attempt to successfully covert this recording for you! 

     

     

      S
      Newcomer
      Svenuniverse
      Newcomer
      August 14, 2023

      I have the same problem did all of methods you mention and still not converting my record. when it has 88% completion it will just turn off like nothing happened .

        S
        Newcomer
        Svenuniverse
        Newcomer
        August 14, 2023

        I still have 80gb storage space on my disk

        S
        Newcomer
        SilverMoonPhoto
        Newcomer
        August 21, 2023

        Hi All, I'm also having the same problem with conversion of my recording stopping, always at 45%.  It keeps giving the message "Zoom quit unexpectedly".  I've looked at all the troubleshooting and I should be fine and still no conversion or reason or rhyme.  I desperately need this recording for a client deadline on Friday!  HELP!

          R
          Community Manager
          rn-zm
          Community Manager
          August 21, 2023

          Hey @SilverMoonPhoto welcome to the community! Sorry you're not able to convert your local recording! May I ask, are you on Windows or macOS when attempting to convert your recording? 

          S
          Newcomer
          SilverMoonPhoto
          Newcomer
          August 22, 2023

          Hey @SilverMoonPhoto do you have any files named "double_click_to_convert_01.zoom" and "double_click_to_convert_02.zoom"? I've tried to reproduce the conversion error by manually stopping the conversion in the middle of it, but I'm unable to initiate the double_click_convert files. For context, I'm running Windows 10 with Zoom version 5.15.10, but if you find the following files, could you try the following with them? 

          1. Locate the “double_click_to_convert_01.zoom” and “double_click_to_convert_02.zoom” files on your device, copy them, and save the copies to a different location on the device. 

          2. Open the desktop client and launch a new meeting

          3. Locally record the meeting briefly for 10 seconds (video is not required)

          4. End the recording

          5. Browse to and open the folder created for this new local recording:
            Windows users - C:\Users\User Name\Documents\Zoom
            macOS users -  /Users/User Name/Documents/Zoom

          6. Delete all of the files found within the folder of the new local recording

          7. Copy the “double_click_to_convert_01.zoom” and “double_click_to_convert_02.zoom” from the recording that you were previously unable to convert and paste them into the new folder

          8. Open the desktop client, select the Meetings tab, and select “Recorded”

          9. On the list, find and select the new meeting that had just been launched

          10. Select “Convert”

          11. When the conversion has finished, the recording should launch automatically, and the files should be found within the new folder.

          Let me know if you find this successful! 


          I did all this and unfortunately, no joy yet.

            Terms & ConditionsAccessibility statement
            Copyright © Zoom Communications, Inc. All rights reserved.