Zoom room theme not applying | Community
Skip to main content
C
Newcomer
CounoTech
Newcomer
November 14, 2022
Question

Zoom room theme not applying

  • November 14, 2022
  • 13 replies
  • 1 view

I'm trying to enable dark mode on a few zoom rooms and it doesn't seem to be applying the settings to the actual zoom rooms as they all remain in light mode.

 

I've set the theme in the global account settings as well as on each zoom room setting as well and I've also completed reboots of the zoom rooms but they still remain in light mode. I've attached screenshots of the theme settings I've set to verify this is set to dark mode.

 

Is there something I'm missing that needs applying on these to adjust them to be dark mode on the zoom rooms?

    13 replies

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 14, 2022

    Hi

     

    Can you confirm on which version the Zoom Rooms are?

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 15, 2022

    Hi Pieterbotes,

     

    the Zoom rooms were all recently updated to version 5.12.6.

    Thanks

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 15, 2022

    That should work then.  Are these Windows/Mac/Appliances?  And what controllers are you using?

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 18, 2022

    Hey,  Unless i am in the wrong place i don't see that on the controller, image attached.

     

     

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 18, 2022

    Hi, that is the right place.  I'm definitely missing something here.  Give me a run down of the components here.  This a Windows based Zoom Room? 

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 21, 2022

    Hey,

     

    Apologies I'm not to hot on the Zoom admin portal.  Where would i go to check that?

    We have the controller in rooms "i think" and have iPad's on the room walls to show busy free etc.

     

    Thanks,

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 21, 2022

    Hey, so under the Zoom Admin portal go to:

    Room Management --> Zoom Rooms

    Then check for the room you are working on and click on that room.  That should then show you the device and under the middle column it will show what system it is.

     

    Please remember not to post anything that has PII (IP addresses etc) on it.

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 22, 2022

    Thank you.  Image attached.

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 22, 2022

    Thanks.  The iPad itself is where the issue is as that is only on v5.9.4.  Check on the iPad is you can upgrade the Zoom app via the App Store.  It should indicate that there is an update available.  When that is done you should have the dark mode being applied.

     

    Have this answered your question? If so, don’t forget to mark the reply as an accepted solution!  

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 22, 2022

    Hey,

    Thanks for your help thus far.

     

    The client has advised "I have updated the Zoom controller App on the iPads of Collab rooms 1 and 2, meeting room and library (board room is being used at the moment and cannot be accessed), and the tablets in the rooms are still in white."
    Images attached.

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 22, 2022

    That should have upgraded to v5.12.6 which is the current version.  I see it only went to v5.10.  Dark mode is only supported from v5.11 and upwards on the iPad as a controller.  Is the iPad maybe on some sort of MDM or something?  I don't have and iPad with that specific IOS version to test with but you may also want to make sure the iPad is on the latest IOS version.
    We definitely need to get to the correct app version on the iPad to resolve this.
    You can see on this link the latest is:  v5.12.6. Zoom Rooms Controller on the App Store (apple.com)

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 23, 2022

    hi,  the client has updated the IOS and the apps but they still have the same issue 😞

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 23, 2022

    final image from previous update

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 23, 2022

    that still looks like the previous version.  Can you check on the Zoom Admin portal what version it is showing?

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 23, 2022

    sorry i thought i had included those.

    Here they are

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 24, 2022

    From the client

    This is the boardroom tablet, and I have also checked all the other devices and they all look the same.

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 28, 2022

    @CounoTech Just a note that I'm looking into this with a couple of team mates to see what we could be missing. Will reply soon.

    P
    Community Champion | Employee
    pieterbotes
    Community Champion | Employee
    November 28, 2022

    @CounoTech I need to get some clarity here as this might be the issue.  The screenshots you previously shown me on this thread stated iPad as the controllers.  But the new photos you shown me of the controllers are actually Logitech and those look to be USB based to a Windows Room.  Is that correct?

     

    If so, the iPad controllers should now already show dark mode as that is supported today.  The Logitech via USB mode to Windows based Zoom Rooms is not supported right now.  This should change really soon but I can't give any dates on this.

    C
    Newcomer
    CounoTechAuthor
    Newcomer
    November 29, 2022

    Hi,

     

    Apologies for any confusion.  The controller is the Logitech and the iPad shows the free busy times.  the controller goes into a Hub.  We have a similar setup with a Logitech and dark mode works without issue 🙂

     

    Thank you,

    Show more replies
    Terms & ConditionsAccessibility statement
    Copyright © Zoom Communications, Inc. All rights reserved.