When I connect an external monitor, the camera does NOT rotate in landscape mode (in the external monitor using DEX). I can turn the device and it might lock for a few moments, however when I interact with the app it reverts back to 90 degrees I've tried all the possible settings in the Galaxy Tab S8 and the Zoom meeting app (Version 6.4.11.30526), without success. It works great on Google Meet without issue. Can you help?

In the June 16, 2025 Zoom Events Release Notes (as of this posting), there is the following entry:

I can't find any other reference to this anywhere.  Where can one configure this setting?

I also looked for the similar Zoom Sessions functionality mentioned in that note, but can't see any place in Zoom Sessions where the Join button timing can be configured.

If you find it, please let me know... maybe with a screen shot.  Thanks!

I have several meetings that use zoom to connect. This would not be a problem except that Zoom refuses to initialize my camera. No matter what I do, the camera stays off. In settings it accesses it fine but not in zoom, one post I read said to change the camera settings in Zoom to foundation, I have done this and still no results. Should I just break down and get a better web cam or is there a way to fix this one?

TIA

Jo

Hello Community,

During the first week of June 2025 I conducted audio check-ins with several different groups of singers slated to sing in three-part harmony for a Zoom event held last Saturday.  We had good success with each group when they toggled  "Original Sound for Musicians" to the "on" setting on the device they used to join the Zoom.  We could hear all three parts and the sound quality was decent for Zoom! 

Fast forward to Saturday June 21 - same groups, same devices, same use of "Original Sound for Musicians" and the quality was significantly degraded. When singing in unison the quality was okay, but when the singers went to three parts, we could rarely hear the parts.  All of us had made sure to install the lastest version of Zoom....  Was there something that changed?

RME UFX III causes Zoom to Hang in Audio Settings.

Greetings, when I launch Zoom and open Settings/Audio, I get the spinning beachball and must force-quit the Zoom app. This is due to Zoom not being able to address all 188 channels that the UFX III presents by default. My workaround currently is to run the interface with a USB 2.0 cable that reduces the channels to 60, which creates issues with my other audio apps. Is Zoom aware of this and working on a fix? Thank you.

Mac Studio M2 Max / Ventura 13.6.3 / Zoom 5.17.0 (27246)

I am a super Admin for the account and we have a sites using Zoom Phone with two Poly Edge e350 desktop phones. The users at the site have reported that when these devices are on an active call, there is no external audible ring to indicate a second incoming call. Other than the beep that is heard in the handset only, which is not sufficient to alert nearby team members.

Our goal is to configure the devices so that a second incoming call triggers an audible ring from the phone’s speaker, ideally at a volume loud enough for another team member to hear and respond by picking up a different phone in the area.

Does anyone know if there’s a configuration or solution that would make this possible? If so, could you please share what steps would be needed to implement it?

Thanks!